0
What else can I help you with?
What is 650 degrees in BTUs?
One measure does not directly translate to another. A BTU is the amount of heat that it takes to raise the temp of one pound of water by one degree F. A burning match, and a burning fireplace may both be at 650 degrees, but the fireplace gives off more heat (more BTUs)
How many btus are required to raise the temperature of 15 pounds of water from 100 degrees fahrenheit to 130 degrees fahrenheit?
To calculate the BTUs required to raise the temperature of 15 pounds of water, you can use the formula: BTUs = Weight of water in pounds × Temperature change in degrees Fahrenheit × 1 BTU So, the calculation would be: BTUs = 15 lbs × (130°F - 100°F) × 1 BTU = 15 lbs × 30°F = 450 BTUs.
How many btus must be removed from one pound of water at 200 degrees f for it to end up as ice at 30 degrees f?
313 Btu
How many btus will it take to raise 50 pounds of ice at 32 degrees to water at 160 degrees?
To raise 1 pound of ice from 32°F to water at 32°F it requires 144 BTUs. Since you have 50 pounds of ice, you would need 50 * 144 BTUs to raise the ice to water at 32°F. To further raise the water from 32°F to 160°F, you would need an additional amount of BTUs based on the specific heat capacity of water.
How many BTUs does it take to raise the temperature in a 40 gallon water heater 60 degrees F?
To calculate the BTUs needed to raise the temperature of a 40-gallon water heater by 60 degrees Fahrenheit, you can use the formula: BTUs = gallons × temperature rise × 8.34. For a 40-gallon heater, it would be 40 gallons × 60°F × 8.34 BTU/gallon°F, resulting in approximately 20,016 BTUs. Therefore, it takes about 20,016 BTUs to achieve that temperature increase.
What is 650 celsius to Fahrenheit?
650 degrees Celsius is equivalent to 1202 degrees Fahrenheit.
How many btus are required to change 5 pound of ice at 20 degrees Fahrenheit to steam at 220 degrees Fahrenheit?
To change 5 pounds of ice at 20°F to steam at 220°F, you will need to go through multiple phases: raise ice temperature to 32°F, melt ice to water at 32°F, raise water temperature to 212°F, and then convert water to steam at 212°F to steam at 220°F. The total heat required, in BTUs, is around 503 BTUs per pound of ice, which translates to about 2515 BTUs for 5 pounds of ice.
How many btus are required to change one pound of ice at 20 f to steam at 220 f?
It takes approximately 144 BTUs to change one pound of ice at 20°F to water at 212°F, and an additional 970 BTUs to change the water to steam at 220°F, for a total of 1114 BTUs.
What is 650 degrees c to f?
650 degrees Celsius is equal to 1202 degrees Fahrenheit. You can convert Celsius to Fahrenheit by multiplying by 9/5 and then adding 32.
How many btu's must be removed from 1lb of water at 200 degrees for it to end up as ice at 30 degrees?
There are no units for the temperature. The temperature change could be 230 Celsius degrees or 170 Fahrenheit degrees (94 Celsius degrees). In fact they could be in less commonly used units: eg Reaumur.
How many BTU to heat lard to 390 degrees?
To determine the BTUs required to heat lard to 390 degrees Fahrenheit, you need to know the starting temperature and the amount of lard you're heating. The specific heat capacity of lard is approximately 0.5 BTU/lb°F. For example, if you have 1 pound of lard at room temperature (about 70°F), it would require about 160 BTUs to reach 390°F, calculated as follows: (390°F - 70°F) × 0.5 BTU/lb°F = 160 BTUs. Adjust the calculation based on the actual weight and starting temperature of the lard.
How many btus of heat are removed per hour when the water at a flow rate of 10 lbs per minute is cooled 15 degrees?
To calculate the BTUs removed per hour, you can use the formula: BTUs = flow rate (lbs/min) × temperature change (°F) × 1. If the flow rate is 10 lbs/min and the temperature change is 15°F, the calculation is: 10 lbs/min × 15°F × 1 BTU/lb°F = 150 BTUs/min. To find the hourly rate, multiply by 60 minutes, resulting in 9,000 BTUs per hour.
