1 gallon = 16 cups
1 cup = 0.06 Gallon
Idk235 gallons
It should take around 30,457 gallons to fill that pool. Using the Volume formula (pi * radius^2 * height), I determined that the pool was roughly 4071.5 cubic feet. I then used Google calculator to convert this to gallons.
Modern toilets use 1.6 gallons of water to flush and older models used 3 gallons
460 trillion gallons
The amount of water used to fill and refill a sink typically ranges from 1.5 to 2.5 gallons per minute, depending on the sink's flow rate. So, filling a sink can use anywhere from 1.5 to 5 gallons of water.
The number of buckets needed to fill a tub depends on the size of both the tub and the buckets. For example, if a standard bathtub holds about 40 gallons of water and a typical bucket holds 5 gallons, you would need approximately 8 buckets to fill the tub. However, this can vary based on the specific dimensions of the tub and bucket used.
That depends a great deal on the type and size of tub as well as on how deep you fill it. Most people are not going to fill the tub up as much for small children as they will for an adult and a really big and fat person cannot put as much water into the tub as a short, skinny person (unless they want the tub to overflow). Typical bathtubs used in the USA can hold 40 to 60 gallons of water - but if you fill them to the top you will overflow the water when you get in.
depends on vehicle used-milage varies
Sinks come in many sizes. I commonly see them between 3 and 20 gallons.
By how many gallons of water are used over a set time period.
It takes approx 2 to 5 gallons of water. Depending on the age of the toilet and the type of flush you have.
6