The cost of driveway gravel can vary depending on the type of gravel and where you purchase it from. On average, you can expect to pay around $30 to $50 per cubic yard for driveway gravel. It's best to check with local suppliers for specific pricing in your area.
The amount of water a cubic yard of gravel can absorb varies depending on the type of gravel and its porosity. On average, gravel can absorb around 20-30% of its volume in water. This means that a cubic yard of gravel can potentially absorb around 200-300 gallons of water.
You will need about 3.7 cubic yards (around 4.75 tons) of gravel.
You would need 7.2 cubic yards of gravel to cover an area that requires that volume of material. It's crucial to ensure that you acquire the right amount to prevent any shortage or surplus during your project.
A 5-gallon bucket typically holds about 0.67 cubic feet of material. Crusher run gravel weighs approximately 2,500 pounds per cubic yard. Therefore, a 5-gallon bucket of crusher run gravel would weigh around 1,667 pounds.
AnswerThe density of gravel varies depending on many many things. For one there is packed and loose density. Next the density varies much of how many fines and coarses (sand and rock) are in the gravel mixture. There are many ways to find the density of gravel but takes a little know how. So there is no definite answer to this question.The density of compacted gravel will vary from 2100-2300 kg per cubic meter.
It depends on the depth you want the gravel to be and also how much you are charged per cubic yard. However, you will need a minimum of 2,565.5 cubic yards of gravel if you use a 4-inch depth to cover 1,800 square feet. This equates to roughly 28.5 tons of gravel.
You will need 65.93 cubic yards or 84.6 tons of gravel.
$8.00
It depends on the depth you require. Using a 12-inch depth, you will need about 218.5 tons of gravel (170.4 cubic yards).
i saw $20-25 for coin size type gravel
If you use a depth of 3 inches, that area will be about 16.2 cubic yards (around 20.785 tons) of gravel.
We don't have the area of the driveway so it would be hard to say. Grass will not grow in compacted gravel so you would have to remove all the gravel and possibly bring in top soil before laying the sod.
The weight a gravel driveway can hold depends on various factors such as the thickness and quality of the gravel layer, the strength of the underlying soil, and how well the driveway was constructed. Generally, a properly installed gravel driveway can support the weight of cars and light to medium trucks without issues.
A: One cubic foot. That would be 0.037 cubic yard (rounded)
12x75 x how deep you want it (expressed in decimal form) ie .5 for 6`` = cubic feet. Divide that answer by 27 and you have cubic yards and that is how you order it.
Gravel costs in Hawaii depend largely on the quality and content of the mix. However, it costs about $170 on average per cubic yard.
To determine how much pea gravel is needed to cover a 600 square foot driveway, you first need to decide on the desired depth of the gravel layer, typically 2-3 inches. For example, if you choose a depth of 3 inches (0.25 feet), you would calculate the volume by multiplying the area by the depth: 600 sq ft x 0.25 ft = 150 cubic feet. Since pea gravel typically weighs about 100-110 pounds per cubic foot, you would need approximately 15,000-16,500 pounds of pea gravel, which translates to about 7.5-8.25 tons.