Psi (pounds per square inch) and inches of Hg (inches of mercury) are both units of pressure measurement. To convert between them, you can use the conversion factor that 1 psi is approximately equal to 2.036 inches of Hg. This conversion factor allows you to relate pressure values in psi to inches of Hg and vice versa.
Standard pressure is 760mm Hg, so the difference in pressure is 40mm Hg (760mm - 720mm).
To convert between absolute pressure in kPa to gauge pressure in mm Hg, you can use the conversion factor of 1 kPa = 7.5 mm Hg. Therefore, if the required absolute pressure is 20 kPa, the corresponding gauge pressure would be 20 kPa * 7.5 mm Hg/kPa = 150 mm Hg.
The change in vascular pressure is a decrease of 17 mm Hg (35 mm Hg - 18 mm Hg).
The partial pressure of hydrogen gas can be calculated by subtracting the partial pressure of helium from the total pressure. Therefore, the partial pressure of hydrogen gas would be 161 mm Hg (600 mm Hg - 439 mm Hg = 161 mm Hg).
To convert Torr to mm Hg, divide by 1.33. So, the partial pressure of helium in mm Hg is 439 Torr / 1.33 = 330 mm Hg. To find the partial pressure of hydrogen, subtract the partial pressure of helium from the total pressure: 600 mm Hg - 330 mm Hg = 270 mm Hg. Hence, the partial pressure of hydrogen gas is 270 mm Hg.
The normal blood pressure is usually between 120-140 mm Hg (systolic) and 80 - 90 mm Hg (diastolic). Anything higher will be considered as high blood pressure
We express atmospheric pressure or barometric pressure in millimeters of mercury (Hg).
what is 99'' of static pressure equal to in hg(mercury)
Converting 740 torr to mm Hg: 1 torr = 1 mm Hg so 740 torr = 740 mm HgTotal pressure = partial pressure O2 + partial pressure N2O (nitrous oxide, not nitrogen oxide)Pressure of N2O = 740 mm Hg - 370 mm Hg = 370 mm Hg
about 700mm Hg or about 27.49 in Hg
The pressure of a gas at 2 atm is equivalent to 1520 mm Hg. This conversion is based on the fact that 1 atm is equal to 760 mm Hg.