4 quarts = 1 gallon 41 quarts divided by 4 = 10.25 gallons
8 pints = 1 gallon 1 pint = 1/8 gallon 12 pints = 12 x 1 / 8 = 12 / 8 = 6 / 4 = 3 /2 = 1.5 gallons So 12 pints is less than 3 gallons
First you have to calculate the volume (cubic capacity) of the container and then multiply by the number of gallons per cubic foot. Formula for calulating volume is radius-squared x pi x depth: 1.5-squared x 3.1416 x 5 = 35.343 cubic feet. There are 7.481 gallons per cubic foot, Hence, 35.343 x 7.481 = 264.40 gallons to fill the container.
To convert the volume of a cylinder from square inches to liters, you first need to calculate the volume in cubic inches using the formula V = πr^2h. Then, convert cubic inches to cubic centimeters by multiplying by 16.387. Finally, convert cubic centimeters to liters by dividing by 1000.
Nanometers (nm) and pounds per square inch (psi) are units that measure different things, so direct conversion between them is not possible. Nanometers measure length while psi measures pressure. To convert between the two, you would need additional information like the area over which the pressure is being applied.
water is roughly 8lbs per gallons..........convert your ounces into gallons and finish the math that way
convert 20,000 gallons to pounds
An estimate would be 240 pounds. Pounds is a unit of mass/weight. Gallons is a liquid measure. They do not convert cleanly. The density of the liquid being measured can make a big difference. If the liquid is water, there is 8 pounds to a gallon.
To convert 3000 tons of water to gallons, you first need to know that one ton is equivalent to 224 gallons of water. Therefore, to convert 3000 tons, you would multiply 3000 by 224 to get 672,000 gallons of water.
That converts to 4000 pounds which is the same as 2 tons. Pounds is a unit of mass/weight. Gallons is a liquid measure. They do not convert cleanly. The density of the liquid being measured can make a big difference. If the liquid is water, there is 8 pounds to a gallon.
The conversion of pounds to gallons depends on the substance being measured (e.g. water, milk, etc.) as density varies. To convert pounds to gallons, you need to know the density of the substance in question. For water, 1 pound is approximately equal to 0.12 gallons. So, 18 pounds of water would be roughly equivalent to 2.16 gallons.
To convert pounds to US gallons, it depends on the substance being measured as the conversion factor varies. For example, for water, you can use the conversion factor of 8.34 pounds per gallon to convert 940 pounds into approximately 112.7 gallons.
600 pounds of water is equivalent to approximately 71.6 gallons.
The estimate would be just under 8 gallons. Pounds is a unit of mass/weight. Gallons is a liquid measure. They do not convert cleanly. The density of the liquid being measured can make a big difference. If the liquid is water, there is 8 pounds to a gallon.
Pounds is a unit of mass/weight. Gallons is a liquid measure. They do not convert cleanly. The density of the liquid being measured can make a big difference. If the liquid is water, there is 8 pounds to a gallon. This would be 87.5 gallons.
Well, first of all you have to convert the gallons in liters, since you'll use S.I. units for your comptutation. So 300 gallons is about 1.135,2 liters, and taking into consideration the density of water which is equal to 1g/mL, or 1kg/L, 1.135,2 liters of [pure] water weigh approximately 1.135,2 kilograms, which is about 2.500 pounds.
50 gallons of plain water weighs about 417 pounds.