1.0 meter = 3.2808399 feet
So,
120 m/sec * 3.2808399 = 393.700788 ft/sec
Chat with our AI personalities
To convert cubic meters per second to cubic feet per second, multiply by 35.3147 since 1 cubic meter is approximately equal to 35.3147 cubic feet. Therefore, 6.342 cubic meters per second is equivalent to approximately 224.26 cubic feet per second.
CFM is a Volumetric Flow Rate while m/s is a velocity, you need the additional measurement of the Cross Sectional Area of the flow to fully work it out.Since there are 2118.88 CFM : 1 m3/s41.3 CFM divided by 2118.88 = 0.01949 m3/sDivide this by the area in m2 & you will get m/s.
The size of the pipe needed for 1 cubic meter per second of water flow depends on the water velocity required and the material of the pipe. Generally, for water flow without excessive pressure drop, a pipe with a diameter between 0.2 to 1.0 meters is adequate. The specific pipe size can be calculated using hydraulic principles considering factors such as flow rate, pressure, and pipe material. Consulting with a hydraulic engineer or using specialized software can help determine the exact pipe size needed.
48 inches is equal to 4 feet. This is because there are 12 inches in 1 foot, so dividing 48 by 12 gives you 4 feet.
There are 9 square feet in each 1 square yard. To convert from square feet to square yards, divide by 9. To convert from square yards to square feet, multiply by 9. 2500 square feet is approximately 277.78 square yards. In general, tile, laminate and hardwood are quoted in square feet, while carpet is almost always quoted per square yard.