0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How big is 6 gauge wire?
The size of the wire is stated by its gauge under American Wire Gauge. Six gauge wire is size 6 AWG.
What gauge wire should be used with a 60amp circuit breaker?
Use AWG # 6 wire.
What wire gauge is needed for a single phase 60 amp circuit?
#6 wire is good for 65 Amps as long as it is type THHN.
What gauge wire is needed for a 220 50 amp circuit?
AWG #6
What is the minimum gauge of wire that can be used for bonding wires connecting to the TGB?
6 AWG
How big is 6 gauge wire?
The size of the wire is stated by its gauge under American Wire Gauge. Six gauge wire is size 6 AWG.
What gauge wire should be used with a 60amp circuit breaker?
Use AWG # 6 wire.
Is a 6 gauge wire larger than a 12 gauge wire?
Yes, the smaller gauge number, the larger the wire is.
If the wire dia is 4mm then what is the gauge?
A wire with a diameter of 4mm corresponds to a wire gauge of approximately 6 AWG (American Wire Gauge). The relationship between wire diameter and gauge is not linear, so different wire diameters can correspond to the same gauge.
What gauge wire for a 60 amp circuit?
AWG #6 wire.
What is 6 gauge?
A thickness of wire or metal.
What gauge wire do you use on a 6 volt battery?
If you are referring to the main battery cable use 00 guage cable.
What wire should you use for 50 amp?
For a 50 amp circuit, it is recommended to use a 6-gauge wire for copper or a 4-gauge wire for aluminum to ensure proper capacity for the current. Make sure to follow local electrical codes and regulations when selecting and installing the wire.
What gauge of wire should you use for 230v 50a 90ft and 20 duty cycle?
AWG # 6
What is the gauge of 0.163 wire?
The nearest wire size is #6 AWG which is .162023.
You are hooking up a 220v air conditioner you were told to use 10-2 wire how do you hook this up?
10-2 wire refers to 10 gauge, 2 conductor wire. Youshould use wire that is 10 gauge or larger (8 gauge, 6 gauge, 4 gauge, 2 gauge). The larger the wire, the more it will cost. most people install using the smallest size permitted, which in this case is 10 gauge. The are specifying the wire size to ensure that you do not connect the air conditioner to electric power using wire that is two small. If you are having problems with this type of question, you should consult an licensed electrician for help in connecting your air conditioner.
What gauge wire and amp breaker do you use on a stove dryer and hot water heater?
For a stove, use a 8 or 6 gauge wire with a 40 to 50 amp breaker. For a dryer, use a 10 or 8 gauge wire with a 30 amp breaker. For a hot water heater, use a 10 or 8 gauge wire with a 30 or 40 amp breaker. Be sure to consult local electrical codes and guidelines for specific requirements.
