No. If you use a larger fuse you are not protecting the device which has a rating of a lesser value.
Wiki User
∙ 12y agoIt is a fuse that is rated in one thousandths of an amp. An example, a 500 mA fuse can also be called a 1/2 amp fuse.
7.2kW shower = 32 Amp fuse = 6 mm2 cable size7.5kW shower = 40 Amp fuse = 10 mm2 cable size8.5kW shower = 40 Amp fuse = 10 mm2 cable size9.5kW shower = 40/45 Amp fuse = 10 mm2 cable size10.5kW shower = 45 Amp fuse = 16mm2 cable size
20 amp on a 12 volt system
You can replace a higher rating fuse with a lower rating provided it works with the device without constantly blowing. So try the 30 amp fuse in your lawnmower and if it doesn't blow and the mower works okay, you are fine. If it blows you will have to go back to 40.
Use a 20 amp fuse or breaker.
A T5AL is a tubular 5 amp 20mm x 5mm Slow Blow Anti Surge glass fuse.
Check the Distributor. There is a surge protector that looks like a condenser. I replaced it and the problem went away.
Yes, you should use a 60 amp fuse in a 60 amp disconnect to ensure proper protection and compatibility with the electrical system. Using the correct amperage fuse helps prevent electrical hazards and keeps the circuit operating safely.
fuse number 1 is 10 amp fuse 2 is 25 amp fuse 3is 25 amp fuse 4 is a spare fuse 5 is 10 amp fuse 6 is a spare fuse 7 is 20 amp fuse 8 is 25 amp fuse 9 is 20 amp fuse 10 is 5 amp fuse 11 is 5 amp fuse 12 is a spare fuse 13 is 5 amp fuse 14 is 15 amp
A 13 amp fuse is recommended for an appliance rated at 1hp. This will provide sufficient protection for the appliance and its components in case of a power surge or electrical fault.
1 amp
NO! Using a larger amp fuse defeats the purpose of the fuse to protect the wiring in the circuit. This can cause a fire. Always use the correct amp fuse for that circuit.
NO! Using a larger amp fuse defeats the purpose of the fuse to protect the wiring in the circuit. This can cause a fire. Always use the correct amp fuse for that circuit.
absolutely not
no you can't
15 is the amp pf the cigarette lighter fuse in Astra envoy.
The 1965 Chevrolet Impala SS fuse box requires a 20 amp fuse for the taillights. A 30 amp fuse can be used when a 20 amp fuse is not available.