0
Still curious? Ask our experts.
Chat with our AI personalities
Maxine
Lao
Ezra
Add your answer:
Earn +20 pts
Is there a way to wire a 3 way household dimmer switch as a 2 way dimmer switch?
You need a three way switch to control lights from two locations. The name is misleading. Three way switch refers to the connection points on the switch. You can use a three way switch as a single switch as long as you place hot wire on the brass screw and the use any of the other screws for the return hot.
What wattage dimmer switch should you use?
Remember that dimmers are for incandescent lights only unless you invest BIG BUCKS on dimmable fluorescent lights and fluorescent dimmers. Make sure that the switch that you replace with the dimmer does not control a plug-in outlet unless it is a lamp. You could do harm to an appliance not designed for such use. Otherwise,just add up the wattage of all the bulbs on the dimmer and buy one of the next size rating. So if you have two 60 watt bulbs, two 75 watt bulbs-- that's 270 watts total.Find a dimmer rated for 300 watts or more.
I am removing a dimmer switch to put in a regular switch but there are two incoming hot wires what do i do?
The regular switch just connects in the circuit the same way as the dimmer switch came out. If the dimmer switch had its own wires the only difference will be is you will have to supply your own wires from the new switch to the existing connection. IF YOU ARE NOT ALREADY SURE YOU CAN DO THIS JOBSAFELY AND COMPETENTLYREFER THIS WORK TO QUALIFIED PROFESSIONALS. If you do this work yourself, always turn off the power at the breaker box/fuse panel BEFORE you attempt to do any work AND always use a meter or voltage indicatorto insure the circuit is, in fact, de-energized.
How do you control a lamp from three different positions?
we use 2-3way switch and 1-4way switch
Im adding a new ceiling fan in my living room i pulled the old fixture down i noticed 2 sets of 3 wire BWR and 1 set 2 wire BW BW going to the wall switch how should you wire in the fan?
White is for neutral on the fan, black is power for the motor, and red is power for the light. If the power from the switch only has two wires (black and white), you would hook up white to white and hook black and red from the fan to the black wire from the wall switch. This means that you'll be powering the fan and light on the same switch and to change the fan and light separately you will have to pull on the chains or use a remote control.
