0
You can't but you can install a plug on the end of a cord. Just go purchase one and install it. Very simple to do. Black wire goes to copper screw, white wire goes to silver screw, and ground or green wire goes to ground screw. It both wires are brown then connect the wire with the ridges on the outside of the wire to the silver screw as it is the neutral. The wire that is smooth is the black hot wire which connects to the copper screw.
What else can I help you with?
When removing an electrical plug from its socket grasp the electrical cord?
Do not remove any electrical plug by grabbing the wire. This weakens the connection at the plug. ALWAYS grab the plug itself when removing it.
Are there 3 prong to 4 prong adapters for driers?
No, and adapters are not needed. What needs to be done in remove the old three blade dryer plug and install a new four blade cord on the dryer.Dryer plug three to fourInstructions should come with the new cord. Open up the electrical access panel on the back of the dryer. You will see a terminal block with three wires going into it from the plug cord assembly. A red and black and white are now connected to the terminal strip. Look at the position and colours of the existing 3 prong cord and how it is connected. Make a diagram. Coloured wires on the outside terminals white in the center. From the center wire terminal you will see a jumper strap that goes to the frame of the dryer. When installing the four prong plug this jumper is removed completely. The kit should have with it a grounding lug that connects to where the removed grounding strip attached to the frame of the dryer. This is the attachment point for the fourth green ground wire from the new dryer cord assembly.
What is electrical hand tools?
They are tools that require electricity. This may come from using an extension cord to plug the tool into the wall or the tool may use a battery pack.
When you are replacing a male plug on an electric cord. Which screw does the black wire go on?
The black wire goes to the brass colored screw and the white wire goes to the silver screw.
How do you convert an older electric range to a 4 wire plug when there is no bonding strap on the range It now has a 3 wire cord I need to convert it to a 4 wire cord.?
The difference between a 4-wire and a 3-wire is a separate ground and neutral. That being said, all you have to do is connect the ground wire to chassis ground, and the neutral wire directly to the neutral connection. The phase wires are made up the same as the old cord. You must also remove the bonding jumper, but if there isn't one... IF YOU ARE NOT ALREADY SURE YOU CAN DO THIS JOBSAFELY AND COMPETENTLYREFER THIS WORK TO QUALIFIED PROFESSIONALS. If you do this work yourself, always turn off the power at the breaker box/fuse panel BEFORE you attempt to do any work AND always use an electrician's test meter having metal-tipped probes (not a simple proximity voltage indicator) to insure the circuit is, in fact, de-energized.
What is the purpose of the plug on the cord?
The purpose of the plug on the cord is to connect the cord to an electrical outlet so that electricity can flow through the cord and power the device it is connected to.
Is it acceptable by OSHA to plug an extension cord into another extension cord-?
You can plug an extension cord into another extension cord. A extension cord is to help make doing something easier.
How do you convert a Guitar Hero 2 Guitar for the PS2 to a Xbox 360 version of Guitar Hero 3?
you plug in the cord to your usb on your xbox.
What are the safety considerations when using an extension cord with a removable plug?
When using an extension cord with a removable plug, it is important to ensure that the plug is securely attached to the cord to prevent any electrical hazards. Make sure the plug is compatible with the cord and that it is inserted fully and securely. Inspect the cord for any damage or fraying before each use, and avoid overloading the cord with too many devices. Always unplug the cord by pulling on the plug itself, not the cord, to prevent damage.
How can I replace a plug on a cord?
To replace a plug on a cord, first cut off the old plug and strip the insulation from the cord wires. Then, attach the wires to the new plug following the manufacturer's instructions. Make sure to secure the wires properly and test the connection before using the cord.
How can I safely convert a dryer from a four-prong to a three-prong plug?
To safely convert a dryer from a four-prong to a three-prong plug, you will need to replace the cord with a three-prong cord that matches the outlet in your home. Make sure to follow the manufacturer's instructions and turn off the power before making any changes. If you are unsure, it is recommended to consult a professional electrician for assistance.
Is it safe to plug an extension cord into another extension cord?
No, it is not safe to plug one extension cord into another extension cord as it can create a fire hazard due to potential overloading of the electrical circuit.
Is it safe to plug one extension cord into another extension cord?
No, it is not safe to plug one extension cord into another extension cord as it can create a fire hazard due to overloading the electrical circuit.
Is it safe to plug a fridge into an extension cord?
It is generally not safe to plug a fridge into an extension cord because it can overload the cord and pose a fire hazard. It is recommended to plug the fridge directly into a wall outlet to ensure safety.
What is the purpose of a mini DVI to VGA cord?
The mini DVI to VGA cord is a converter cable or adapter cable. These types of cables will take input from one type of port and convert it into output which will be sent into the second type of port. In this case it will plug in something with a mini DVI plug into a VGA port.
Where is the block heater cord in a ford escape 2006?
you have to buy the plug-in cord (for the block heater) separately. Block heater is about $34.00 CDN and the cord is about $75.00 CDN. The cord has the regular end to plug into your electrical socket and the other end has a special plug end for the heater.
What steps do take to change the power cord on your tv?
unplug old cord...plug in new cord
