Wiki User
∙ 15y agoYou must have a switch to turn the disposal on and off. If you are asking how to connect because you do not have a switch. Install the switch under the sink just above the door opening. You can buy disposals that turn on and off when you place the lid over the hole. InSinkerator makes one.
Wiki User
∙ 15y agoclamp is an electrical device having two jaws which open to allow clamping around an electrical conductor. This allows properties of the electric current in the conductor to be measured, without having to make physical contact with it, or to disconnect it for insertion through the probe.
There are only a few parts and components that separate a cordless electric drill from a corded electric drill. Having a battery instead of a cord is the biggest difference.ÊÊ
If you're asking whether you have to connect the fixture ground to the house ground, you do. The idea is to connect any exposed portion of a metal fixture to ground, keeping anything you would be able to touch from having a hazardous potential on it. The way to do this is to connect the fixture ground (which is connected to the metal chassis) to the building ground (which comes from your electrical panel).
The source in electric cuircuit is having sex with a woman.
"Converting" an oil furnace to electric will not be economically practical. You'd be far better off getting a "ground source heat pump" and having someone install it for you. They're much more efficient than the older style electric heat that uses resistor heating elements.
You can't. You need to connect the hardware to install it.
Equipotential lines in an electric field are imaginary lines that connect points having the same electric potential. Along these lines, no work is required to move a charge between the points, as the electric potential is the same. Equipotential lines are always perpendicular to electric field lines.
to connect to xbox live you need a router or a modem
It makes work easier than doing everything by hand without the motor.
what you actually want to do is use a continuity tester, the element actully gets because it creates a controlled short, kind of like if you touch a wire to both posts on a battery any how there are two screws on each element that is where you connect the tester.
There used to be an option where you could join Wiki Answers without having to connect Facebook. Unfortunately, they have removed this feature.
By using a router with DHCP turned on in the router
USB
An electric pallet jack or electric pallet truck is powered by an electric motor. Allowing the operator to move pallets without having the manually pump/push to lift and/or move pallets. They come in both walk behind and ride on configurations.
no!
Many times, it is possible to use an epilator for 10 to 15 years without having to replace it. This will help you save money from having to buy disposable and electric razors.
Connect a light bulb to a battery, and put the whole thing in a tube so you can hold it.