I would recommend you use 1/0 gauge
exercise
14 gauge will handle it with a 15 amp breaker. If you use 12 gauge use a 20 amp breaker.
A domestic D/W uses 14 gauge wire.
No, 10 gauge wire requires the use of a 30 amp breaker. A 20 amp breaker is only used on 12 gauge wire.
dum question no anwser
The compound gauge is an instrument to measure pressures, positive or negative.
A compound gauge is a pressure gauge that displays both negative and positive gauge pressure measurements. Gauge pressure is a measurement of pressure relative to ambient pressure. For example, if ambient pressure was 14.7 PSI and you were to measure absolute vaccum using a compound gauge, the gauge would indicate -14.7 PSI.
The Compound Gauge measures above and below atmospheric pressure (in psig and inches of mercury).
To calibrate compound gauges, you will need a calibration pump and a pressure calibrator. Connect the compound gauge to the calibration pump and apply pressure using the pressure calibrator. Compare the readings on the compound gauge with the readings on the pressure calibrator and make necessary adjustments to bring them into alignment.
TR means "tonne of refregeration". it is bacically the colling capacity of the a/cs.
pressure and temperature
mX+4# n4 k4u?
i need to explain what an absolute pressure gauge measures
I use a fuel pressure gauge.
I would recommend you use 1/0 gauge
12 gauge