If you are adding a new light, do not touch the old nob and tube. It is out dated and you should be in the precess of removing it. Never add tonob and tube. If you are just replacing a light fixture you want to put the new fixture back the same way you took the old one out. You need to take extra care not to move or disturb the wires too much. The old insulation can become brittle and break off. In general if you still have knob and tube you should start the process of replacing it.
Turn the light nob to the left and a orange light should come on under the lights nob.
turn nob all the way to the right and pull the nob out towards you ( away from the dash)
On the left side of the front dash by the reading gauge there is a nob that looks like an oven nob, turn the nob to the left to turn the lights on. Below that is the wheel to brighten or lessen the reading gauge panel.
Yes there is. You simply twist the tachometer reset nob counterclockwise to dim.
at nob street
Nub's Nob was created in 1958.
You should turn the lights on, (should be a nob thing that you turn) just give it a pull and it should slide bank and your spots should be on. One more light pull the fog light will go on.
What is NOB ??
because Tim is a nob because Tim is a nob
Nob Nation was created in 2006-11.
The duration of Nob Nation is -300.0 seconds.
i have to put freon R-134 into my 99 3.8 L, its in the center rear, (away from headlights). you can tell because there is a black nob hooked up to the silver in color tube. with the do it yourself stuff its hard because its in an akward position but wasnt realy designed for it i guess. just un screw the black nob on the silver tube that is center rear under the front hood.