Chat with our AI personalities
If a home were wired in series, every light and appliance would have to be turned on in order for any light or appliance to work.Because people dont like it
In a modern home you use parallel circuit's. The reason why they are parallel circuit and not series is For example: say your kitchen light goes off, if that light goes off the others in your house won't. They also use parallel circuit in schools. However, when there is a switch in the circuit, that switch is in series with the load, so you could say that electrical wiring is arranged in series-parallel.
Two receptacles on a branch circuit, each in parallel, both in series with the circuit breaker. The blower motor, ignition transformer, and oil solenoid on an oil burner, each in parallel, all in series with the acquastat (water temperature control switch).
Lights at home are connected in parallel. (Switches are connected in series with the lights in order to turn them on and off.) This way, each light receives the same voltage. Placing the lights in series would divide the voltage between the lights, reducing the power of each, and it would have the effect that one light burning out would cause all the others on the same circuit to stop working.
They're connected in parallel, this is so that everything connected to the circuits will receive the same voltage. Also, if everything was connected in series, if one of the components died, everything would be dead (think of christmas lights)