answersLogoWhite

0

How much does it cost? Will it fit in the space provided? Is cooling for it provided? When can it be delivered? Does it need provision for tapping for minor voltage changes? Does it need provision for remote monitoring? Voltage variation with load. Conformance with applicable standards. Frequency. A TRANSFORMER IS A PASSIVE DEVICE SO YES THE INPUT VOLTAGE IS NECCESSARY FREQUENCY OF OPERATION THE KVA OUTPUT IS ALL THAT YOU NEED.

User Avatar

Wiki User

16y ago

What else can I help you with?

Continue Learning about Electrical Engineering

Can resistors be used to use a 110 volts rated hairdryer in a 220 volt source?

Resistors could be used if you can find resistors with a high enough wattage rating to dissipate the heat that they will generate. Your best bet is to purchase a voltage adapter. The adapter is just a transformer that steps down the voltage from 220 to 110 volts. Locate on the hair dryer what the wattage draw is and then match the transformer (adaptor) to that wattage output.


What is wattage rating of microwave oven transformer also hi voltage from secondary?

The rating is about 1500W. This is for both the input and the output. Output voltage is usually 2,000 volts. Divide watts by input volts to get input current. And divide watts by output voltage to get output current. -Joe


What step down transformer need to supply fluorescent lamp in watts?

To answer this question some values must be stated. The voltage and amperage must be known to find the wattage. W = A x V.


Is it dangerous to run an appliance with more watts than the transformer?

A transformer has a rating that is usually expressed in KVA. This is approximately a wattage rating. It is not dangerous but it can be the cause of some concern. An appliance has a set current that is draws. This current times the voltage is the appliance's wattage. The same goes for the transformer. It only has a certain capacity to supply a specific current that is governed by its KVA (watts). Driving the transformer beyond its rated capacity tends to heat the transformer beyond its working temperature. If left in this over current draw the transformer's windings insulation will break down and the windings will short circuit. This is usually the end of a working transformer. So short answer, more watts (amps) from appliance equals burned out transformer.


What is the voltage drop across each lamp?

To answer this question a supply voltage must be stated. Also the wattage of the lamps is needed.

Related Questions

Can resistors be used to use a 110 volts rated hairdryer in a 220 volt source?

Resistors could be used if you can find resistors with a high enough wattage rating to dissipate the heat that they will generate. Your best bet is to purchase a voltage adapter. The adapter is just a transformer that steps down the voltage from 220 to 110 volts. Locate on the hair dryer what the wattage draw is and then match the transformer (adaptor) to that wattage output.


How many watt transformer is needed for 2.5 amp motor?

A 60-watt transformer would be sufficient for a 2.5 amp motor, as a general rule of thumb is to multiply the amps by the voltage to determine the power rating in watts. At standard household voltage (120 volts in North America), 2.5 amps x 120 volts = 300 watts. However, it's recommended to use a transformer with a slightly higher wattage to account for potential power surges or fluctuations.


Will a 300 watt low voltage transformer power 150 watts of bulbs 250 feet away?

No, the 300 watt low voltage transformer will not be able to power 150 watts of bulbs 250 feet away. The voltage drop over the distance will be significant and may not provide sufficient power to light up the bulbs effectively. It is recommended to use a higher wattage transformer or install additional transformers closer to the bulbs.


What are the key considerations when selecting a low voltage landscape transformer for outdoor lighting?

When selecting a low voltage landscape transformer for outdoor lighting, key considerations include the transformer's wattage capacity, voltage output, compatibility with the lighting system, durability, weather resistance, and ease of installation.


What is the best way to select and install a 300 watt low voltage transformer for outdoor lighting?

To select and install a 300 watt low voltage transformer for outdoor lighting, first calculate the total wattage of your lighting fixtures to ensure it does not exceed the transformer's capacity. Choose a transformer with a wattage rating higher than your total wattage needs. Install the transformer in a dry, well-ventilated area close to a power source, following the manufacturer's instructions for wiring and mounting. Regularly check for proper functioning and safety.


What are the key considerations when selecting a low voltage transformer for a 300 watt application?

When selecting a low voltage transformer for a 300 watt application, key considerations include ensuring the transformer can handle the wattage capacity, selecting the appropriate voltage rating, considering the efficiency and size of the transformer, and ensuring compatibility with the electrical system and safety standards.


What are the key considerations when selecting a low voltage transformer for LED lights?

When selecting a low voltage transformer for LED lights, key considerations include the transformer's wattage capacity, compatibility with the LED lights' voltage requirements, efficiency, reliability, and safety features such as overload protection and short circuit protection.


What does a transformer in a microwave oven do?

It outputs high voltage so that the magnetron (which is recieving the 2000v the Microwave transformer produces) can emit microwaves and it will cook the food but if fed lower voltage it is like a lower wattage it will cook slower


What happens if transformer wattage is much less than load wattage?

If the load current is too high, the power lost in the transformer windings will be too high and it will overheat. If the voltage is excessive, the power lost in eddy currents in the magnetic core will be too high and it will overheat.


How do you use 205V equipment on 120V?

You can use a transformer or voltage converter to step up the voltage from 120V to 205V for your equipment. Make sure to select a transformer that can handle the wattage and current requirements of your equipment to avoid damaging it.


How can I choose the right pool light transformer for my swimming pool?

To choose the right pool light transformer for your swimming pool, consider the voltage requirements of your pool lights and match them with the transformer's output voltage. Additionally, ensure the transformer has the appropriate wattage capacity to power all your pool lights. It's important to consult with a professional or refer to the manufacturer's guidelines to ensure compatibility and safety.


What is the best way to select and install a 12v LED transformer for optimal performance and efficiency?

To select and install a 12V LED transformer for optimal performance and efficiency, consider the following steps: Determine the total wattage of the LED lights you plan to connect to the transformer. Choose a transformer with a wattage rating that is higher than the total wattage of the LED lights to avoid overloading. Ensure the transformer is compatible with 12V LED lights and has the appropriate voltage output. Install the transformer in a well-ventilated area to prevent overheating. Connect the LED lights to the transformer following the manufacturer's instructions. Test the setup to ensure proper functionality and adjust as needed for optimal performance and efficiency.