0
Still curious? Ask our experts.
Chat with our AI personalities
Ross
Devin
JudyFor a 1.5 hp air conditioning unit, it is recommended to use a circuit breaker with a rating of at least 15 amps. This will ensure that the breaker can handle the starting current surge of the compressor without tripping. It is important to consult the manufacturer's specifications for the exact breaker rating required for your specific air conditioning unit to ensure safe and proper operation.
Add your answer:
Earn +20 pts
What size breaker you would use for a 110 volt window air conditioning unit?
Breaker sizing is dependant on what the load amperage is that the breaker is connected to. If the amperage is not given but just the wattage, use this equation I = W/E. Amps = Watts/Volts. This air conditioner unit should be on a dedicated circuit receptacle. On these types of loads the conductor can only be loaded to 80% of the conductors rating. So a 15 amp breaker times 80% = 12 amps or Watts = Amps x Volts, 12 x 120 = 1440 watts. A 20 amp breaker times 80% = 16 amps or Watts = Amps x Volts, 16 x 120 = 1920. Once the breaker is sized remember to use the correct wire size to correspond with the amperage of the breaker.
How do you calculate the watts of a central air and heat unit?
You should not have to calculate the watts of the unit. All the information that you need will be on the nameplate of the unit. It is this information that electricians use to calculate the conductor size and breaker to supply the power to the unit.
What is the difference between Air circuit breaker and Vacuum circuiut breaker?
"Air" and "Vacuum" describe how the breaker extinguishes the arcing current. An Air breaker opens far enough that the dielectric strenght of air is enough to extinguish the arc. A vacuum breaker's contacts are in a vacuum. Oil breakers use oil. SF6 breakers use SF6 gas to extinguish the arc.
Why would plugging in an Air Conditioning unit in a wall receptacle blow a fuse?
The fuse (or circuit breaker) rating has been exceeded. I'm assuming you do NOT have the AC unit connected to a dedicated circuit. Lets say you have a 15 amp circuit breaker and the AC unit draws 12 amps and other items on the same circuit draw an additional 5 amps. The total amp draw of 17 amps exceeds the circuit design capacity; so the breaker trips to prevent an electrical fire. If you have old style fuses, NEVER EVER replace a fuse with a higher rated one! I'm sure you'd have problems with your homeowners insurance paying out when your house burns down. Have an electrician run a new dedicated circuit for the AC unit and you should be good to go.
What is the acceptable value of contact resistance in 415V air circuit breaker?
415v air circuit breaker acceptable value of 0.01 ohms and lessthan
