It means the breaker has been tripped. There are two possible ways to reset it - some have a button on the outlet (there may be several outlets on one circuit, so you may have to look around) the other is the main breaker in your breaker box. You'll need to find a reset the breaker.
Residual Current Device. Also known as an Earth Leakage Circuit Breaker or a Safety Switch
The panel and breaker have to be of the same manufacturer. This way the breaker will fit into the panel. If the panel has a push in bus bar, the breaker must also be the type to accept the bus bar. If the bus bars in the panel are of the bolt in type then the breaker also has to be a bolt in breaker.
AF refers to the ampere rating of the breaker frame and AT refers to the breaker trip rating in amps. These are not breakers that you would find in your home but industrial molded case breakers. The current trips can be changed out to different values all within the same frame size.
is there an error if the upstream circuit breaker is 16A TP and the downstream circuit breaker is 16A TPN?
An ice breaker is something to start a conversation or to relieve tension or inhibitions between people.
Usually it is an ice breaker. That is just something to say to get a conversation going.
"Cut the ice" and, more commonly "Break the ice" mean "to initiate a conversation".
Ice Breaker Road Race was created in 1980.
there is none
club penguin
ice breaker
its out already, but the next game is glassworks, and then comes ICE BREAKER THE RED CLAN!!!, a sequel to ice breaker
Because they make people laugh-what could be better than that? They make people curious, and generally intrigued. They are also a good ice breaker, or a good topic for conversation.
In reality, you Can not
break the ice berd da
An ice-breaker.