0
Add your answer:
Earn +20 pts
How does a automatic transfer switch work?
The load have deference two feeder like transformer &generator when the power of transformer shutdown the load get power from second feeder generatoraoto
What would happen to the power dissipated in the voltage divider?
'Power dissipation' in a voltage divider describes the rate at which energy is transferred from the resistors to the surrounding atmosphere through heat transfer, due to the work done on the resistors by the current flowing through them. If the work done on the resistors causes their temperature to increase faster than heat transfer takes place (a function of the surface area of the resistors), then they will overheat and, possibly, burn out.
Concept of maximum power transfer in transmission line?
Transfer capability in transmission system defines the capability of system to reliably transfer power from one zone to other or from one part to other without affecting system stability. Under this concept there are various terms like Available transfer capability (ATC), total transfer capability (TTC), capacity benefit margin (CBM), TRANSFER CAPABILITY MARGIN (TCM). The term maximum transfer capability is termed as Total Transfer Capability means maximum power transfer from one part to another without violating system constraints.
Explain open-loop transfer function of a close system?
An open loop transfer function is the transfer function of a system without incorporating the feedback component. For example, where the closed loop transfer function with unity feedback H(s) = G(s)/(1+G(s)) it can be deduced that the open loop transfer function is Y(s)/U(s) = G(s).
How do you bypass an electric meter?
There is no need to bypass the utility meter. In order to use power generated on site, you need to install what is called a transfer switch. The transfer switch selects either utility power (that comes through the meter), or site generated power, but never both at the same time. You then wire branch circuits from the transfer switch to the various lights, receptacles, etc. you want to power. You can buy transfer switches that have from one to 20 or more circuit breaker positions to do this.Never, ever wire site generated power directly to utility-fed circuits!This can cause severe damage, as well as hurt or kill people. If there is a power outage, and you are running your generator (or whatever), you can backfeed power onto the utility lines. The workers trying to fix the outage, can come in contact with the lines, thinking they are dead, not realizing you are backfeeding power to them. Be safe, use a transfer switch!IF YOU ARE NOT ALREADY SURE YOU CAN DO THIS JOBSAFELY AND COMPETENTLYREFER THIS WORK TO QUALIFIED PROFESSIONALS.If you do this work yourself, always turn off the powerat the breaker box/fuse panel BEFORE you attempt to do any work AND always use a meter or voltage indicatorto insure the circuit is, in fact, de-energized.
What is capacity to do work or transfer heat?
That would be energy. Energy is the ability of a system to do work or transfer heat.
Does work have energy?
Yes, work can possess energy. In a physical sense, work is the transfer of energy that results in the movement or displacement of an object. In a broader sense, the effort and exertion put into completing a task or achieving a goal can also be considered as a form of energy.
Is work the transfer of energy?
In a sense, work can be seen as the transfer of energy between a system and its surroundings. When work is done on a system, energy is transferred to it, and when work is done by a system, energy is transferred to its surroundings. This transfer of energy through work is a fundamental concept in physics.
How does heat transfer work?
a guy
Why is work considered to be the transfer of energy?
Work is considered the transfer of energy because when a force acts over a distance, it can transfer energy to an object, causing it to move or change its position. This transfer of energy is known as doing work on the object. The work done on an object is directly proportional to the force applied and the distance over which the force is exerted.
What is the use of file transfer software in a work setting?
File transfer software is used in a work setting in order to share and transfer files within a group of people or even a group of machines to allow for work to continue in any circumstance.
The metric unit for work is also called a?
Work is transfer of energy; thus, the unit of work is the same as the unit of energy. The SI unit is called "Joule".Work is transfer of energy; thus, the unit of work is the same as the unit of energy. The SI unit is called "Joule".Work is transfer of energy; thus, the unit of work is the same as the unit of energy. The SI unit is called "Joule".Work is transfer of energy; thus, the unit of work is the same as the unit of energy. The SI unit is called "Joule".
Does the manaphy egg transfer work with Pokemon platinum to?
Yes, it does work.
Is work related to energy?
Basically, work refers to an energy transfer.
Why do energy and work have the same units?
Energy and work have the same units (joules) because work is the transfer of energy from one form to another. When work is done on an object, energy is either transferred into or out of the object. This transfer of energy is what causes change in the object's state.
What happens as a result of transfer of energy?
work
What is the relationship between work and energy in physics?
Work done on an object is the transfer of energy to or from that object. Energy can be defined as the capacity to do work. In physics, work and energy are interconnected concepts where work is the transfer of energy from one system to another.
