0
Add your answer:
Earn +20 pts
What is a light fixture?
A fixture or device that holds a light in place by means of some sort of socket, that is connected to a power source.
What is a pin based fluorescent light fixture?
A pin based fluorescent light fixture is the type of fixture that takes fluorescent tubes. On each end of the fluorescent tubes there are contact pins. These pins are used to hold the tube in the fixture and to supply the voltage to the tube from the fixture's ballast.
What do you do with extra wires to a light fixture?
Extra wires to a light fixture are dangerous. It can cause electrical shock when having contact to people therefore it must be guarded to avoid physical contact.
How do you connect an ON-OFF switch to control the light?
To control a light with a switch, the switch has to be connected in series with the light fixture.
Can a hps light fixture be plugged in to a regular outlet?
If the ballast of the HPS fixture has a 120 volt tap then, yes it can be plugged into a 120 volt receptacle.
What happens when your brain overheats?
Beats me
How do you spell fancy light fixture?
A fancy light fixture may be called a chandelier(originally a hanging candelabra).
How do you wire a 220 volts light?
The light is wired the same as any voltage fixture. Bring the source voltage to the fixture and connect it to the two fixture wires. If you want to control the off-on of the fixture take the source voltage to a switch first and then out of the switch to the light fixture.
How do you remove the dome from a light fixture?
Take the nut off at the bottom of the light fixture by unscrewing it.
What happens if your motocross bike overheats?
It Gets hot
Can you connect a wall switch and a light fixture to an existing light fixture?
Yes, you can connect a wall switch to an existing light fixture by running a new electrical wire from the switch to the fixture. This allows you to control the light fixture independently of the existing fixture. It is recommended to consult a licensed electrician to ensure proper wiring and installation for safety.
What happens when a motor overheats?
It makes the motor run insufficiently.
How do you release dome from light fixture in ceiling fan?
Disconnect the fixture wires and remove the central mounting nut to release the dome from the light fixture in a ceiling fan.
What is a light fixture that hangs from the ceiling?
A chandelier is a decorative light fixture that hangs from the ceiling and typically has multiple arms with light bulbs.
Can a bad lighting fixture cause a light bulb to fail?
If you install a bulb and it immediately fails with a flash then the fixture or more likely the supply voltage is a problem. This is a rare failure mode for the standard screw-in incandescent bulb. Essentially the only way it can happen is if a voltage in access of the rated voltage is applied to the bulb. It is more likely that the fixture shorts out and takes the bulb with it during the current surge. This can happen more easily than a constant over voltage condition, but after that the fixture is usually toast. If there is a ballast built in to the fixture, it can fail in a way that can eat light bulbs. One other failure mode that can reduce life of bulb is an enclosed fixture that overheats and causes the bulb to have a reduced life span.
What happens when your metro pcs phone battery overheats?
Well mine the light starts to blink from red to green back and forth. This happens when i leave it on the charger and over use it. Idk about other phones.
What happens if the bulb is not working?
If the bulb is not working, the flow of current to the light fixture is interrupted, and the light will not turn on. This could be caused by a burnt-out bulb, a faulty fixture, or a problem with the electrical supply. It's important to troubleshoot the issue to identify and fix the root cause of the problem.
