Ohms is a measurement of resistance between the amp and speakers. Most home audio is 8 ohm, if you run 4 or 6 ohm speakers you cut resistance down and get more power out of the amp. Say your stereo is 100X2 @ 8ohm, if you use 4 ohm speakers you should get 50% more power BUT the amp is working twice as hard and can burn up.
Multiply the vots by the amps to find the volt-amps. Or divide the volt-amps by the voltage to find the amps.
Amps is amps be it DC or AC.
There are 20 million amps or 20,000,000 amps.
In 50 VA the V stands for volts and the A is for amps. Hence the formula you are looking for is 50/240 = Amps.
5 amps
its a 6ohm sub in the stock location. if you are going to replace it you will need to purchase a good amp. the stock amp does not have adequate power to power any other sub. 10" Kicker comp subs make a great replacement, and get an amp that is half the RMS power input of the sub. make shure that you are reading the AMPs RMS power output.
Multiply the vots by the amps to find the volt-amps. Or divide the volt-amps by the voltage to find the amps.
0.35897 amps = 0.35897 amps.
200ma is .200 amps or .2 amps
7 amps
.1 amps will give you .1 amps.
Amps is amps be it DC or AC.
There are 20 million amps or 20,000,000 amps.
In 50 VA the V stands for volts and the A is for amps. Hence the formula you are looking for is 50/240 = Amps.
What is the generator amps
it is either 110 amps or 135 amps
To convert high voltage (HV) amps to low voltage (LV) amps, you can use the formula: HV amps = LV amps x (LV voltage / HV voltage). By rearranging the formula, you can calculate LV amps by dividing HV amps by the ratio of HV voltage to LV voltage.