0
Still curious? Ask our experts.
Chat with our AI personalities
Maxine
Judy
LaoAdd your answer:
Earn +20 pts
Are staples required where cables run through holes in framing?
No, staples are not required where cables are run horizontally through holes in framing members. When the cable changes direction from horizontal to vertical runs from the last hole a staple is required, no greater distance that 16 inches from the hole.
Are staples required where cables are run through holes in framing members?
Staples are not required where cables are run horizontally through holes in framing members. When the cable changes direction from horizontal to vertical runs from the last hole a staple is required, no greater distance that 16 inches from the hole.
Why via holes provided in printed circuit boards?
Via holes (vias) are provide in a PCB for taking signal traces from one layer to another. So all multi layer PCBs will have via holes. Vias are also provided for supporting and assembling through hole devices or connectors.
Why BJT is called bipolar device and FET an unipolar device?
FETs can be called UNIPOLAR devices because the charge carriers that carry the current through the device are all of the same type i.e. either holes or electrons, but not both. This distinguishes FETs from the bipolar devices in which both holes and electrons are responsible for current flow in any one device.
Is electric current and current the same thing?
Not really. You can compare them with the analogy of water flowing through a pipe. For water to flow, there must be a pressure difference across the ends of the pipe. An electric current is a movement of electric charges along a conductor. For those charges to move, there must be a voltage (more accurately, a 'potential difference') across the ends of the conductor. So a potential difference is required to cause current to flow.
