0
For a 2600-watt amplifier, the appropriate wire size depends on the voltage and the length of the wire run. Generally, for a 12-volt system, you would use at least 4 AWG wire for runs up to 10 feet, and 2 AWG for longer distances. Always consider the ampacity and potential voltage drop, and consult wire gauge charts for specific applications to ensure safety and performance.
What else can I help you with?
What size hot wire do you need for a 1900 watt amp?
A 12 gauge wire can support a load of approximately 2200 watts.
What size amp circuit breaker do you use on a 55 watt fluorescent light?
A 55 watt fluorescent light only pulls 0.4 amps. Lights can be installed on a 15 amp breaker using 14/2 wire. A maximum of 1440 watts is all that is allowed on a 15 amp circuit.
What size of wire do you need for 5 kw heat strip?
120 15 amp service ? 210 7 amp service ?
What size wire for 2 100 amp meters?
1awg
What size ground wire for 100a service?
A 100 amp residential service requires a size #8 copper wire, it should be insulated in green.
What size gauge wire for 4000w amp?
on a 4000 watt amp the best gauge wire woul be between 2 and 0
What size gauge power wire do you need for a 4000 watt amp?
2 or 4
What size gauge power wire do you need for a 1200 watt amp?
You should use a 4 guage wire. There is a handy chart located at http://www.the12volt.com/info/recwirsz.asp which lists the proper wire size for differing wattages.
What wire size needed for 120 volt 3000 watt load?
AWG # 10 wire on 30 amp circuit.
What size hot wire do you need for a 1900 watt amp?
A 12 gauge wire can support a load of approximately 2200 watts.
What size wire and breaker do you need for a 5000 watt garage heater?
Look on the heater and see what amps it is pulling. That will determine the wire size and breaker size. It must be on a dedicated circuit. 15 amps = AWG # 14 wire with 15 amp breaker 20 amps = AWG # 12 wire with 20 amp breaker 30 amps = AWG # 10 wire with 30 amp breaker 40 amps = AWG # 8 wire with 40 amp breaker
What gauge wire do you need for 1800 watt amp and 2 550 watt subs?
4 gauge
What size gauge power wire do you need for a 5000 watt amp?
Look i have a 5500 watt power acustic amp and its saids not to use nothing under 0 gauge. So use that thicker wirer mean better performance. Try it!!
What Wire kit do you use for a 180 watt amp?
18 gauge
What size amp circuit breaker do you use on a 55 watt fluorescent light?
A 55 watt fluorescent light only pulls 0.4 amps. Lights can be installed on a 15 amp breaker using 14/2 wire. A maximum of 1440 watts is all that is allowed on a 15 amp circuit.
What size amp do i need for two 10 inch kicker comp's?
You could go with a 600 watt 2 ch amp or a 300 watt mono block amp, depends on what OHM the subs are, if they are 8 ohm you could wire them down to 4 ohm or if they 4 ohm u could wire them to 2 ohm, i have a 600.1 Boss amp and subs are wired together at 2 ohm and they BANG.
What is the recommended wire size for a 20 amp breaker?
The recommended wire size for a 20 amp breaker is typically 12-gauge wire.
