0
What else can I help you with?
What is the output current of a 480 Volt primary 208 volt secondary - 3 phase transformer?
You need to mention the Load connected to find the current.
What is single phase autotransformer?
An autotransformer is a transformer with at least two windings where a part of one winding (the common winding) is shared between both primary and secondary outputs.
How do you connect an earthing transformer with delta connected secondary?
You have to connect each phase (R,Y & B respectively) of earthing transformer zig zag winding to each phase of power transformer delta secondary respectively. Then the zig zag winding of earthing transformer star point to be earthed.
What is the meaning of DYN 5 on a transformer nameplate?
D is for the primary winding -> triangle Y is for the secondary winding -> star N -> secondary grounded 5 -> phase difference 180 degrees/5 = 30 degrees
What is kva rating of single phase transformer?
This is the rated output of the transformer, obtained by multiplying the rated secondary voltage by the rated secondary current. And it's 'kV.A', not 'kva'.
Is possible to put 3 phase transformer primary as secondary and secondary as primary?
A: The only way can be possible if the transformer is an isolation type. Yes, you can put the input into the secondary side. This will create a step-up transformer.
What is the voltage phase shift between primary and secondary line voltages in star-delta transformer connection?
The voltage phase shift between primary and secondary connections in a transformer is 180 electrical degrees.
What is the three phase transformer?
it has three primary windings & three secondary windings.
Why phase displacement is maintained between primary and secondary windings of the transformer?
Maintaining a phase displacement between the primary and secondary windings of a transformer allows for the effective transfer of power from the primary to the secondary circuit. This phase difference ensures that the magnetic flux induced in the primary winding can generate a voltage in the secondary winding, enabling power to be transmitted efficiently and accurately between the two circuits.
How you differentiate between single phase and three phase transformer?
A single-phase transformer works with a single-phase supply, while a 3-phase transformer is used with a 3-phase supply. A single-phase transformer has 2 wires on the primary and secondary (ignoring taps) while a 3-phase tansformer has 3 or 4 wires on the primary and secondary.
How should I calculate this. A single phase transformer is rated at 99kVA The primary voltage is 6.6kV and the secondary voltage is 220V Assume no losses and calculate The full load primary current?
First find the ratio of the transformer. 6600/220 volts. Second find the secondary current, I = W/E, 99000/220. Third divide the secondary current by the transformer ratio. The answer will be the primary current. To check your answer (W (or VA) = V x A) multiply the primary current times the primary voltage and the secondary current times the secondary voltage and they should both equal the transformer's kVA.
How many amp in 480 vac 3- phase primary transformer if the secondary it's 120 vac?
This 480-v three-phase transformer probably has a 208-v three-phase secondary which has 120 v from each line to neutral. In that case the primary current is 0.433 times as much as the secondary current, so 100 amps in the secondary means 43.3 amps in the primary.
Does the formula used to calculate the turns ratio uses the phase voltages and phase current?
No, the turns ratio formula calculates the ratio of the primary to secondary winding turns on a transformer using the number of turns on each winding. Phase voltages and currents are not directly used in this calculation.
Is 3 phase star transformer has more winding than delta?
The # of windings in a transformer are based on the primary and secondary voltages the transformer is rated for not the way the windings are connected.
What is the mutual coupling in single phase transformer?
primary winding flux links with secondary winding produses voltage across the secondary winding
What is the relationship of primary windings of a transformer to the secondary windings regarding output and input voltage?
The phase relationship between the primary voltage and the secondary voltage of a transformer is 180 degrees (typically) on single phase transformers. If working with three phase transformers, a zero phase shift is often used in Y/Y grounded transformers. If the transformer is wired Delta / Wye, the phase shift will be 30 degrees. I've seen transformers with a phase shift of 150 as well (quite abnormal, but it exists!) due to the starring and a delta / wye configuration. If you are looking at a transformer phasor diagram, this will show the phase shift between primary or secondary (three phase transformers). For single phase, there should be a drawing showing polarity markings - what goes in the polarity marking on the primary comes out on the secondary polarity marking.
Transformer 208 volt primary and 480 volt secondary three phase 75 kva what size fuses on primar and secondary?
200 and 100
