answersLogoWhite

0

The pre wire for a ceiling fan light should be made with a three wire cable. This cable will have a red, black, and white wire as main conductors. This cable will also have a bare ground wire. This wire should be strung between a two gang switch box to the fixture junction box. This pre wire allows the supply to be either fed to the two gang box. From the two gang switch junction box, one side will be used for the light in the fixture and the other side of the switch junction box, itwill be used for the fan portionin the fixture.

User Avatar

Wiki User

13y ago

What else can I help you with?

Continue Learning about Electrical Engineering

Celiling Fan Installation?

form_title=Celiling Fan Installation form_header=7383 Have you already purchased the fan(s) you intend to use for this project?*= () Yes () No How do you regulate the ceiling fan ? (Tick everything that applies)*= [] Wall switch [] Pull string [] Remote control [] Don't know How high quality of a ceiling fan are you considering installing?*= () Economy grade () Medium grade () Premium grade () Don't Know Please specify what type of ceiling fan installation this is.*= () Need to remove an existing lighting fixture and install a ceiling fan () Need to install a ceiling fan in a new location () Need to replace existing ceiling fan


How do you replace a fan's light bulb?

It depends on the type of fan, whether it is a range hood, bathroom fan, or room ceiling fan. There are several ways they are mounted as explained below. Preferably the power to the fixture in question should be off. 1. If there are thumb screws near the cover (mainly on range hoods and some light only ceiling fixtures), you would remove them. Then you would unscrew the old bulb and screw in the new one. Then you would put the thumb screws back in. 2. This may be just for a light-only fixture, but if the fixture is recessed and the cover is almost completely flush with the ceiling, you would pry it from the ceiling. Then you would replace the bulb. Getting the reataining springs back in may be tricky, and you would need to protect your eyes from debris up in the ceiling. 3. With most bathroom fans that use a square acrylic light cover, you would press into each side and pull it loose. Then you would replace the bulb and snap the cover back on. 4. If you mean a standard ceiling fan, it depends. For most, you would simply unscrew the old bulb and screw a new one in. For others, there are retaining screws holding the globe on, and for a few, the globe unscrews. 5. For a few ceiling fans, you don't replace the bulb, but replace the entire lamp kit. To do that, you remove the 3 screws from the plate above the light kit to drop it down, then disconnect the wiring (cap off the wires from the fan until you are finished), remove the light kit from the plate by loosening the nut. Then follow the instructions with the new light kit and undo the previous steps to reassemble the lower part of the fan with the new light kit.


Do you need 3-wire romex to feed bedroom ceiling box by electrical code?

No, you can feed it with a 2 wire Romex + ground. It depends on what is mounted on the ceiling. If it is just a light all you need is 2 wire + ground Romex. However if it is a fan/light and you want to control each one independant of the other you will need to use 3 wire Romex + ground. This is of course if you have 2 seperate switches. You would then connect the red wire to the blue light wire and the black wire to the black fan wire. If you use 2 wire Romex just connect the blue and black fan/light wire to the black wire in the ceiling box.


Why do ceiling fan lights go out?

Without knowing some more facts, there could be several different answers to explain why a ceiling fan's lights "go out":someone has turned them off at the switch for the lights on the fan unit;the light bulbs are "dead" and need replacing because their filaments have broken;there is a fuse protecting the lighting circuit and it needs replacing because it blew from the surge of high current that sometimes happens when a light bulb "dies";there is a timer in the fan unit which turns the lights off after a certain period of time;the wiring from the switch to the light has become disconnected;the switch in the fan that controls the lights is broken and needs to be replaced...


Is the motor in a ceiling fan ac or dc?

is AC, bro...

Related Questions

What is the recommended type of small base light bulb for a ceiling fan?

The recommended type of small base light bulb for a ceiling fan is typically a candelabra base bulb.


Why new candelabra ceiling fan lights?

In an attempt to safeguard the end user, many ceiling fan manufacturers have made the transition to candelabra type ceiling fan light bulbs.


What type of light socket is compatible with a ceiling fan?

A ceiling fan typically uses a standard light socket, such as an E26 or E27 socket, which is compatible with most common light bulbs.


What is the purpose of a ceiling fan light cap and how does it affect the functionality of a ceiling fan?

A ceiling fan light cap is a cover that goes over the light fixture on a ceiling fan. Its purpose is to provide a finished look to the fan and to protect the light bulbs. It does not directly affect the functionality of the ceiling fan, but it can impact the aesthetics and overall appearance of the fan.


What is the best type of ceiling fan box for a vaulted ceiling?

For a vaulted ceiling, the best type of ceiling fan box is a cathedral ceiling fan box. This type of box is designed to be installed on angled or sloped ceilings, providing a secure and stable mounting for the ceiling fan.


How can I put a ceiling fan and light on the same switch?

To put a ceiling fan and light on the same switch, you can use a dual-function switch that controls both the fan and light simultaneously. This type of switch allows you to operate both the fan and light with a single switch, simplifying the control of both fixtures.


Can you help me replace a ceiling fan with a light fixture?

Yes, I can help you replace a ceiling fan with a light fixture.


How can I add a light to a ceiling fan?

To add a light to a ceiling fan, you can purchase a light kit that is compatible with your fan model and follow the installation instructions provided.


What is the best type of ceiling fan for a vaulted ceiling?

A ceiling fan with a downrod is the best type for a vaulted ceiling as it allows the fan to hang at the proper height for optimal air circulation.


How to install a ceiling fan with light?

To install a ceiling fan with a light, first turn off the power to the ceiling fixture. Then, assemble the fan according to the instructions provided. Next, attach the fan bracket to the ceiling electrical box and connect the wires. Install the fan blades and light kit, then turn the power back on to test the fan and light.


What type of bulb socket is compatible with a ceiling fan?

A ceiling fan typically uses a standard medium base bulb socket, which is compatible with most types of light bulbs.


How much load takes the ceiling fan and tube light?

ceiling fan approx 80w and tube light 40w