Chat with our AI personalities
Do you need to find the outlet at a hardware store, electrical store or around your pool area? At your pool area - GFCI's can sometimes be found around the pool equipment pad. Sometimes they are located just off the deep end of the pool at the edge of the deck straight back from the pool light if your pool has a light. However these fixtures do not have any access to an outlet. It is usually just a GFCI fixture. GFCI's can sometimes be found in shrubbery surrounding the pool. You just have to hunt for it in those locations. And there are the instances where no GFCI is provided. There may also be a GFCI in the circuit breaker box but this one will not have an outlet. What is your need for an outlet? If you have a pool light that does not have a GFCI in the system you then need to call a qualified swimming pool electrician or a qualified pool tech to install one. There are special requirements for this application.K
Not if the GFCI breaker is supplying the circuit you are wanting to put the GFCI receptacle into.
Your question is a bit vague, but let's try a two part answer. If you have a GFCI breaker in an electric panel you should only have one connection at the breaker, but the breaker will protect all devices on the circuit. If you are talking about a GFCI outlet, they are equipped to extend the GFCI protection to other non-GFCI outlets by using the proper "output" connection on the GFCI.
To reset a GFCI you need to first correct any ground faults in the circuit - or some other other fault in the equipment and/or its flexible cord and/or its plug - being protected by the GFCI, which is causing an imbalance in the currents flowing in the hot and neutral wires. Ground faults are usually caused by wet electrical equipment. Then you need to press the RESET button on the GFCI.
Deoends on code you are governed by. In USA, a GFCI outlet or a circuit controlled by a GFCI circuit breaker would be required.