0
What else can I help you with?
Is it all right to cover electric wires with insulation in attic?
Yes as long as they are in a romex style wire. Like 12-2 for example. Which is individual wires incased in an outer jacket. You should never have just single wires running in the attic unprotected or anywhere for that matter. Individual wires must be in a conduit. And any splices should be in a box.
How do you extend an electrical wire across a ceiling?
The neatest way of doing it is to take the wire across the attic side of the ceiling. If there is a floor above, then there is a bit of carpentry involved. Determine which way the ceiling joists run and open a hole between them and fish the wire to the new location where it is needed. There is also in the market place a product called Wiremold. It is a surface conduit system.See Sources and related links below;
Are junction boxes usually wired in the first floor?
Junction boxes are usually laid out so that the circuit splices are located in the basement and in the attic. Attic junction boxes have to have a vertical clearance of three feet above it to make it legal.
What is the voltage requirement for a house attic fan?
Look on the fan motor tag. If you hav`nt gotten the fan yet get one that can use the voltage you have available. Typically in the US 110volt AC.
If a light switch that is connected to an outlet which is burnt out and when you replaced the outlet it burnt out within two weeks so how do you change the switch to operate recessed ceiling light?
you must have to much of a load on the outlet or didnt tighten the screws holding the wires tight enough , it should not go out that quickly. if you want to wire it for recess you first have to check if you can get to the location in the attic above the switch. and you need to be able to fish a wire down to the switch up to the recesed lite. which sometimes is not the easiest job to do , better to just call in the electrician for this job
Is it all right to cover electric wires with insulation in attic?
Yes as long as they are in a romex style wire. Like 12-2 for example. Which is individual wires incased in an outer jacket. You should never have just single wires running in the attic unprotected or anywhere for that matter. Individual wires must be in a conduit. And any splices should be in a box.
Is attic insulation necessary in old houses?
An attic insulation is not necessary in an old house, however without it a lot of heat can escape from the house causing higher electric bills due to heating loss.
If you need to upgrade your home service from 150A to 250A can you run the lines through the attic using a conduit?
It is not recommended to run electrical lines through the attic using conduit for upgrading home service from 150A to 250A. Such an upgrade requires larger gauge wires and a dedicated service panel, which may not be suitable for attic installation due to insulation, temperature, and safety concerns. It is best to consult with a licensed electrician to determine the appropriate installation method for the upgrade.
Do I need an attic fan for my home?
The need for an attic fan depends on your specific home and climate. Attic fans can help reduce heat buildup in the attic, which can lower cooling costs. However, they may not be necessary in well-insulated homes or in cooler climates. Consider consulting with a professional to determine if an attic fan is right for your home.
Is having an attic fan necessary?
Work for what? Can you repost this question with more detail please?
What are the key considerations to keep in mind when planning attic construction?
When planning attic construction, key considerations include ensuring the attic is structurally sound, obtaining necessary permits, considering insulation and ventilation needs, planning for access and egress, and evaluating the impact on the existing structure and utilities.
How do you blow in insulation in attic?
To blow in insulation in an attic, you will need a machine specifically designed for this purpose, which can usually be rented from hardware or home improvement stores. Ensure the attic is properly prepped, insulated around electrical fixtures, and that you have the necessary protective gear. It's recommended to follow the manufacturer's instructions for the specific type of insulation you are using.
How can I ensure a successful Werner attic ladder installation?
To ensure a successful Werner attic ladder installation, carefully read and follow the manufacturer's instructions, gather all necessary tools and materials, measure and prepare the opening accurately, secure the ladder securely to the attic floor, and test the ladder for proper function before use.
What is the Sentence of attic?
There are some strange noises coming from the attic.
If you have 2 old conduit lines in the attic that you can feel the current when you touch the how do you replace them and witch wire is black and which is white?
If you can feel an electrical current when you touch old conduit lines in the attic, it's important to turn off the power at the circuit breaker before attempting to replace them. Once the power is off, you can replace the conduit lines using new wires following the color coding standards - typically, black is used for hot wires and white is used for neutral wires in residential electrical systems. However, it's always advisable to use a voltage tester to confirm which wire is carrying the current before starting the replacement.
How can I install attic stairs in my home?
To install attic stairs in your home, you will need to measure the opening in your ceiling, purchase a suitable attic stair kit, and follow the manufacturer's instructions for installation. This typically involves cutting a hole in the ceiling, securing the stairs in place, and making any necessary adjustments for a proper fit. It is recommended to consult a professional if you are unsure about the installation process.
When was Out of the Attic created?
Out of the Attic was created in 1983.
