0
Add your answer:
Earn +20 pts
Does 240 volt have a neutral wire?
Yes <<>> In North America, a three wire 120/240 volt system uses a neutral wire. For 240 volts two "hot" wires are used with no neutral.
What gauge wire for a jacuzzi with a 40 foot run?
Depends on the amperage of the Jacuzzi and if it is 120 or 240 volts.
What gauge wire would you need 5600 watts 240 volts 23.3 amps?
AWG # 10.
What wire gauge is needed to carry 150 amps at 240 volts?
At the service entrance you will need AWG 1/0 gauge.
What size wire for 10kw 240 volt?
10 mm2 cross section should be sufficient (#6 wire?)
How many volts does 12-2 wire carry?
12-2 wire typically carries 120 volts in residential settings and 240 volts in certain appliances or systems that require higher voltage.
What is ampere rating of 10 gauge wire at 120 volts and at 240 volts?
30 amps.
Does 240 volt have a neutral wire?
Yes <<>> In North America, a three wire 120/240 volt system uses a neutral wire. For 240 volts two "hot" wires are used with no neutral.
How much current at 240 volts passes through a wire with a resistance of 100 ohms?
current = voltage/resistanceAssuming the 240 volts is across the 100 ohm wire, 2.4 amperespower = current * voltageResulting in the wire dissipating 576 watts... One hot wire!
What size copper wire should you use for 240 volts 200 amps?
3/0 wire 3/0 wire
What gauge wire would I need for 2500 feet for 240 volts and 0.4 amps?
A #14 wire will do the job.
Can you use 240 volts with a 120 volt supply?
No, it is not possible to use 240 volts with a 120 volt supply directly. You would need a transformer to step up the voltage from 120 volts to 240 volts. Attempting to use 240 volts with a 120 volt supply without a transformer can damage equipment and pose a safety hazard.
If an electric heater has a red blue and green wire that has been cut off how do i know if its 120 volts or 240 volts?
A label.
How do you wire a wire to a wire?
If you are connecting 120 volts, you connect the black wire to the breaker, white wire to the neutral bar, and ground wire to the ground bar. If you are connecting 240 volts connect the black & white wires to the breaker, & ground wire to the ground bar.
Can a 10-2 wire be connected to a 10-3 recepticle for a dryer?
No, the dryer needs 120 volts supplied by the neutral third wire, along with the 240 volts for the dryer element. One of the two 240 volt supply conductors is used with the neutral to supply 120 volts to the controls and the drum motor. That is why a three wire cable is needed.
What size copper wire do you need for 240 volts 16 amps at 150ft?
10 gauge
How you can produce 240 volts from a single phase 3 wire system with a nominal voltage of 120 volts?
you can use two hot wire different phases with a double pole braker .
