0
How do you calculate arc length between electrode and charge in arc furnace?
Wiki User
∙ 13y ago
Arc Length depends on the secondary voltage of furnace transformer. Thumb rule is for 500V the Arc length would be 500mm(20").
The purpose of arc length is to give maximum power to the melt, without arc flare. -
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
What is the diameter of submerged arc furnace?
Submerged Arc Furnace is also called smelting furnace. The furnace is called submerged Arc because Soderberg(Carbon) Electrodes are , buried inside the charge mix. Though Arcing is there but can not be seen. This Furnace is used for producing Ferro Alloys,Pig iron,Silicon metal, Calcium Carbide, Ferro Silicon,Ferro Chrome, Silico Manganese
Calculate the current where 10 coulombs of charge pass a point in 5 seconds?
Current = charge/time = 10/5 = 2 amperes
Calculate the voltage of a battery that provides 20 joules of energy to 5 coulombs of charge?
calulate the voltage of a battery that provides 20 joules of energy to every 5 coulombs of charge
Charge buildup between the plates of a capacitor stops when?
Charge buildup between the plates of a capacitor stops when the current flow through the capacitor goes to zero.
How much electrical energy is required to move 4.00 mC of charge through a potential difference of 36.0 V?
0.144 JOULES. One can calculate this from the formula E=Vq in which E is energy, V is potential difference & q is charge.
What is Ramo's theorem?
it provides a way to calculate the time profile of charge collected on a electrode based on the geometry of the electrode and the motion of a charge distribution near the electrode. It basically determines the waveform (pulse shape) collected by an electrode due to the presence of a drifing charge, as would happen in, say, a solid state particle physics detector.
What electrode has a negative charge?
The cathode.
What is an electrode that has an netgative charge?
cathode
What are lithium --ion batteries and how do they work?
Lithium ion batteries use lithium metallic oxide in its positive electrode (cathode) and carbon material in its negative electrode (anode). Lithium ions inside the battery transfer between the positive electrode and the negative electrode during charge or discharge. Ms.Helen Ren
How do chemical reaction charge electrodes?
Chemical reactions can result in the movement of charged particles, such as ions, to or from the surface of electrodes. This movement of charge is what creates an electrical potential difference between the electrodes, which can then be harnessed to create electrical energy.
When the switch is closed which electrode will attract the sodium ion?
When the switch is closed, the positive electrode (anode) will attract the sodium ion. Sodium ions have a positive charge, so they will be attracted to the negative charge on the anode.
What is an electrobe that has a positive charge?
Assuming this is a misspelling of "electrode" ... Electrochemistry can be confusing, because the answer depends on the type of device! In a galvanic cell (or discharging battery), the positively charged electrode is the cathode. However, in an electrolytic cell (or recharging battery), the positively charged electrode is the anode. The easiest way to keep this straight is to remember that the cathode is the one the cations (positively charged ions) migrate towards, and the anode is the one the anions (negatively charged ions) migrate towards.
How double layer formed between metal oxide electrode and solid electrolyte?
The double layer formed at the interface between a metal oxide electrode and a solid electrolyte is due to the accumulation of ions from the electrolyte near the surface of the electrode. This accumulation creates a region with excess positive or negative charge on the electrode surface, leading to the formation of the double layer. The presence of this double layer affects the electrochemical behavior and charge transfer processes at the interface.
What is a difference between Anions Cations?
An anion is a negatively charged ion. A cation is a positively charged ion.Anion gets its name from the fact that anions migrate to the anode (positively charged electrode). Cation gets its name because cations migrate to the cathode (negatively charged electrode). Note, therefore, that the charge on the ion is opposite the charge of the electrode toward which it migrates. (Positive attracts negative and negative attracts positive).
What is single electrode potential?
Single electrode potential is the potential difference between a single electrode and its surrounding electrolyte solution in an electrochemical cell. It represents the tendency of the electrode to gain or lose electrons and is a measure of the electrode's reactivity in the cell. It is typically measured relative to a reference electrode, such as the standard hydrogen electrode.
If zinc electrode is dipped in zinc sulphate the electrode will become positive or negative?
if it is dipped the zinc electrode looses the electron in to the solution as zinc ions and it attains negative charge on th electrode and it absorb the positive ions in the solution.so w can see a bundle of positive ions just around the zinc electrode
What is anodize?
In Chemistry an anodic is an electroplating cell in an electrode in which it gets a negative charge as in a negative charge from a chemical reaction in a battery.
