Depends on how big the motor is. A stronger motor will draw more amps then a weaker or less efficient motor. For example a wiper motor draws far less then a starter motor.
read the name plate on the motor
A single phase 10 HP motor will draw aproximately 50 amps. A three phase 10 HP motor will draw aproximately 28 amps.
Then you are trying to get more HP out of the motor that it can supply. Back off on the load that the motor is driving or put a bigger motor onto the load.
The wiring should allow for 115 amps.
Depends on how big the motor is. A stronger motor will draw more amps then a weaker or less efficient motor. For example a wiper motor draws far less then a starter motor.
read the name plate on the motor
A single phase 10 HP motor will draw aproximately 50 amps. A three phase 10 HP motor will draw aproximately 28 amps.
24.87amps 1 hp=746 watts P=IxV ... (746x8)/240
Assuming the power factor is 1, a 10 hp motor operating at 600 volts in a three-phase system would draw approximately 13.33 amps.
It is drawing .06 amps.
Then you are trying to get more HP out of the motor that it can supply. Back off on the load that the motor is driving or put a bigger motor onto the load.
It would be at least 250 amps, maybe 300 amps.
1.25 amps
That depends entirely upon the type of motor. A car starting motor may take a few hundred Amps for the short period.
The wiring should allow for 115 amps.
Have to know the wattage or resistance of the lamp to answer this question.