0
Add your answer:
Earn +20 pts
Can a 230 volt single phase watt hour meter be used to monitor 115 volt single phase?
Yes it would work pretty well but it might not meet its accuracy specification.
How many ohms is 100k ohms?
115 Kohm = 115 *103 = 115, 000 ohm
How much current will a 15 hp single phase 220 volt fan motor draw?
The wiring should allow for 115 amps.
What crrent does a 203-ohm resistor draw from a 115 V power supply?
Ohm's law: current equals voltage divided by resistance, so a 203 ohm resistor would draw 0.57 amperes from a 115 volt power supply.
When using air conditioning is the cost of power the same on a 115 volt circuit using 9 amps same as 230 volt circuit using 4.5 amps?
Yes. Power in both cases is 1.035 KW. Your meter shouldn't know the difference.
How many watts can you plug into a 115 volt outlet?
A typical 15-amp, 115-volt residential outlet can handle up to 1,725 watts (115 volts * 15 amps). However, it's recommended to leave some margin and avoid continuously drawing the full capacity to prevent circuit overloading.
How many watts does 115 volts equal im trying to find out how many amps does a 115 volt is equal to?
To find the number of amps in a circuit with 115 volts and a power rating in watts, you can use the formula: Amps = Watts / Volts. So, if you have a device that runs at 115 volts and consumes 575 watts, the amperage would be approximately 5 amps (575 watts / 115 volts = 5 amps).
How many watts does a Kenmore refrigerator use?
Watts is determined by multiplying amps (found on tag with serial number or on data plate on compressor) by volts (example 115 volts times 9 amps= 1035 watts)
How many amps is 32 watts at 115 volts?
Divide the watts by the volts, so 32 / 115 is the answer in amps.
How many watts in 8.5 amps at 115 volts?
978 watts
How many watts in 115 volts?
Watts and Volts are two distinct types of measurement.
How many amps for 115 watts?
To calculate the amps for 115 watts, you need to know the voltage the appliance is operating at. If the appliance is operating at 120 volts, then the current would be approximately 0.96 amps (115 watts / 120 volts).
8.1 KWh at 115 volt what is the amps?
In U.S. voltage is usually referred to as 120 nowadays. so if in U.S. substitute 120 where 115 appears below. Power = Amperage times voltage So, in your example, 8.5 times 115 = Watts
How many amps in 4000 watts and 115 volts?
To calculate the amperage, use the formula: Amperes = Watts / Volts. For this situation, it would be 4000 watts / 115 volts ≈ 34.78 amps.
How many amps is 350 watts at 115 volts?
3
How many watts are in 60 amps at 115 volts?
To find the power in watts, multiply the amperage (60 amps) by the voltage (115 volts). So, 60 amps * 115 volts = 6900 watts.
How many watts are in 115 volt fridge?
The number of watts measures the power, and Ohm's laws requires us to know the current as well as the voltage to determine the power.P = i x eFor example, if the fridge draws 10 amps at 115 volts, the power is 1150 watts.AnswerThe answer is that it depends on the fridge. Look at the nameplate information for your particular fridge; that's where you will find your answer.
