0
A flat piece of metal about 1/2 inch wide with two 90 degree bends is most commonly referred to as a cornice bracket for ceiling mount. A standard angle iron, 1" x 1" or larger, can be used for cornice board wall mount.
Image can be found by searching for cornice bracket.
Still curious? Ask our experts.
Chat with our AI personalities
Jordan
Ezra
Judy
Add your answer:
Earn +20 pts
What is correct bracket pipes or pipe bracket?
Pipe bracket.
Is the hard drive connected to a mounting bracket If so what type of screws secure the hard drive to the mounting bracket?
Is the hard drive connected to a mounting bracket? If so, what type of screws secure the hard drive to the mounting bracket
What is no follow in web design and webpages?
In web page design, the author can specify whether the Bots should or should not follow and index all pages and links. The command is one known as a META and is placed in the HEAD section of the webpage. For "follow", the syntax of the command is: an opening bracket meta name="robots" content="index,follow" then a closing bracket For "follow", the syntax of the command is: an opening bracket meta name="robots" content="index,no-follow" then a closing bracket
How do you change a Mazda 323F starter motor?
Not certain of model 323F; my standard 323 has the 1.6 L OHC engine and you can change the starter motor as follows: The starter motor is located on the back side of the engine (closest to the firewall) underneath the fuel injection/intake manifold. To replace it, first disconnect the battery, then remove the main power cable (heavy wire) and the start wire (light wire). Next remove the two bolts for the intake manifold support bracket and remove bracket. Remove one bolt on starter rear support bracket and 3 bellhousing flange bolts (two accessible from starter side, on accessible from bellhousing side). the starter is now free and can be taken out form the passenger's side (LHD). Good luck Malcolm
Why is curly bracket used in c plus plus?
Curly braces are used to mark the start and end of a statement, typically used when the statement body consists of two or more individual statements. However they are also used to mark the start and end of a class declaration and function bodies.
