Full load amps is the amperage at which the motor was designed to work at to achieve its rated horsepower. Service factor amps is the amount of a periodic overload at which a motor can operate without overload or damage. Continuous operation within the service factor amps will shorten the insulation and motor bearing life of the motor as the motor will be operating at a higher temperature than it was designed to.
Both are meaning the same definition. simply you put factor beyond the safety.
They store charge between their plates in an electric field
Fill factor is the ratio (or the difference) between the actual output of a solar cell or panel, and its theoretical output (which can be about 30%higher).
Power factor does not go above 1. It is the cosine of the phase angle between voltage and current and, as such, can range between +1 and -1, although it should be understood that a negative power factor is mathematically equivalent to a generator - when looking at the load as if it is a motor - or vice versa. Unity power factor is applicable for a resistive load. A typical power factor for a big motor is about 0.92. A theoretical power factor of zero, corresponding to a phase angle of 90 degrees, would mean that the load is purely inductive or capacitive, and that the power supply and conductors are also ideal or theoretical.
The power factor is a measure of the phase difference. If they are exactly in phase the PF = 1. If they are 180 degrees out of phase PF = 0.
There is no difference between "factor of safety" and "safety factor." They are two ways of saying the same thing.
The electric force between two charged particles decreases by a factor of 4 when the distance between them is increased by a factor of 2. The electric force is inversely proportional to the square of the distance between the charged particles.
The electric force between two charged particles is inversely proportional to the square of the distance between them. If the distance is decreased by a factor of 3, the electric force will increase by a factor of (1/3)^2 = 1/9. This means the force will increase by a factor of 9 when the distance decreases by a factor of 3.
The electric force between two charged particles is inversely proportional to the square distance between them.Accordingly, it is reduced by a factor of 9
a factor is what you multiply by a multiple is the answer
A factor of 1000
Biotic = Living Abiotic = Non-Living there is a lot of difference between a thing that is living and a thing that is non living.
The electric force between two charged particles will increase by a factor of 4 if one particle's charge is increased by a factor of 2. This is because the electric force is directly proportional to the product of the two charges.
The electric force between two charged particles increases by a factor of 4 if one particle's charge is increased by a factor of 2. This is because the electric force is directly proportional to the product of the charges involved.
The difference between a single-factor and multi-factor region is that a single factor region is based on a single physical feature and characteristic. A multifactor regions is based on multiple physical features and characteristics.
The lowest factor is 2 and the highest is 11 so the difference would be 9.
If you double the distance between two charged objects, the electric force between them decreases by a factor of four. This is because the electric force is inversely proportional to the square of the distance between the charges according to Coulomb's Law.