0
What is the formula to determine speed of a driven pulley or sprocket using RPM and Diameter?
Wiki User
∙ 15y ago
For a pulley, it is driver RPM x driver diameter = driven RPM x driven diameter. Keep in mind that the diameter you should use is the diameter where the belt is riding in the pulley. For instance, an A belt in an AB pulley will ride lower in the pulley than it would in an A pulley. For sprockets, the formula is the same, but replace the diameter with # teeth. It looks like this. driver rpm x # teeth of driver sprocket = driven RPM x # teeth of driven sprocket
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
Which gear turns faster if the driving gear is larger than the driven gear?
according to velocity ratio i.e N1/N2 = D2/D1 which implies that diameter of gear is inversly proportaional to speed . hence, DRIVEN GEAR will move faster as it is smaller in size than the DRIVING GEAR
What is the meaning of the menu driven program?
Menu-driven simply means you execute the application's commands by selecting them from a menu, as opposed to command-driven whereby you enter (type) the commands manually.
How is event driven programming different from other programming?
write a note on event driven programming
Menu driven program in c programming?
You can find the source code of the menu driven graphics program here: http://www.start2code.com/Cresources/menu-driven-graphics-program-c.html
Menu-driven Programming in visual basic?
Develop a menu driven proramming in C++ on Examination System ?
How do you calculate sprocket rpm?
calculating sprocket RPM is very easy if you know what the RPM of the drive sprocket is. If you know that then it is a simple fraction problem. If you make the drive gear the numerator or the top part of the fraction and the driven gear the denominator or the bottom part of the fraction (DRIVE/DRIVEN) I.E. if the drive sprocket has 25 teeth and your driven sprocket has 100 teeth (25/100) that will reduce to (1/4) or a 4:1 ratio. So if your drive sprocket is spinning at 1000 RPM then your driven sprocket will be spinning at 250 RPM. You can plug your specific sprocket tooth count into that equation and come up with the right answer.
What is the velocity ration of a pulley?
The velocity ratio of a pulley system is the ratio of the rotational speed of the driving pulley to the driven pulley. It indicates how the speed of the driven pulley relates to the speed of the driving pulley. The formula is: Velocity Ratio = Diameter of driving pulley / Diameter of driven pulley.
If you can change pulley sizes to increase speed which way do you go?
Think about your ten speed bicycle. The bike is in the lowest gear when the front sprocket is on the smallest diameter and the rear is on the largest. On the contrary, when the bike is at high speed, the rear is on the small diameter sprocket and the front is on the large diameter sprocket. Therefore, increasing the drive pulley size will increase the driven pulley speed (assuming the drive pulley stays at the same RPM). Similarly, increasing the driven pulley size will result in a slower speed (again, assuming the drive pulley stays at the same RPM).
How do you calculate velocity ratio in a pulley?
To calculate the velocity ratio in a pulley system, divide the diameter of the driving pulley by the diameter of the driven pulley. This ratio indicates how much faster or slower the driven pulley rotates compared to the driving pulley. It helps to determine the speed or force transmission in the pulley system.
How can you make a 110cc 4-wheeler get faster It's chain driven?
More teeth in the front sprocket and less teeth in the back sprocket. You can also add performance exhaust, and take the governor out.
How can you make a 110cc 4 wheeler get faster It's chain driven?
More teeth in the front sprocket and less teeth in the back sprocket. You can also add performance exhaust, and take the governor out.
Does a vw bora v5 have a cam belt?
The bora v5 does not have a cam belt. It has two timing chains. The first is driven by a sprocket on the crankshaft. This first chain drives a sprocket connected to a smaller sprocket on a common shaft. This smaller sprocket drives the camshaft chain which drives the twin cam shafts. Both chains have tensioners.
Where is the oil pump on a 300zx?
Basically it's inside the oil pan at the front of the car, by the crankshaft sprocket. It is driven by the crankshaft.
What is the size of the stock sprokets on a 1991 Honda nighthawk?
I have a "Clymer Honda CB 750 Nighthawk 1991-1993 & 1995-1999" book. It says for sprocket sizes, "Drive Sprocket 15 teeth, Driven Sprocket 38 teeth". Nothing else listed in there or in the Owner's Manual as to size.
What is a bicycle gear?
On a bike there's one(or more) front sprocket(s) by the pedals connected by a chain to one(or more) rear sprocket(s) by the rear wheel. As the wheel isn't driven directly by the pedals, and there's usually a difference in size between the front & rear sprocket this constitutes a gear.
What is the Hiley formula?
A formula that is used fir driven piles
A drive pully is spinning 600 rpm and has a diameter of 40 millimeters the driven pully has a diameter of 120 millimeters what speed would the driven pully be?
You would use a 5 inch sheave.
