0
Add your answer:
Earn +20 pts
How much does 1 inch thick 96 x 120 inches steel weigh?
in carbon steel it will weigh 3,267.2 lbs. For weight of we have to know:- 1. volume (in cubic centimeter) 2. density so now 1 inch = 2.54 cm 96 inch = 96*2.54=243.84 120 inch = 120*2.54=304.8 so volume=(2.54*243.84*304.8)=188779 cubic cm density = 7.8g/cm3 (varies based on alloying element from 7.8 to 8.05) now mass= density*volume m= 7.8*176980.29=1472476.022 gram= 1472.5 kg=3246.25 lbs (depends on density)
What is the weight of 50x50x5 mm mild steel angle per meter length?
What is the weight of 50x50x5 mm mild steel angle per metre length? Density mild steel is 7.85 g/cm3 Volume is 2x(4.5x0.5x100)+(0.5x0.5x100)=475 cm3 Weight is 7.85x475=3728.75 g (per metre).
What length does half inch round mild steel bar comes in?
Normally 12' or 20' bars
What is the copper percent in mild steel?
Mild steel, not copper.
Density of galvanized iron?
A galvanized iron is similar to steel; it is material that composed of cold-rolled and hot-dip galvanized mild steel. It has 7850 kilograms per cubic meter density same as a steel.
What is Weight of one cubic inch of mild steel?
0.283 pounds per cubic inch
Weight of steel per cubic inch?
Steel is an alloy - a mixture of various metals - and so its density depends on the proportion of the constituents in the alloy. The weight (not mass) varies between 9.0 and 9.3 pounds weight per cubic inch.
1 cubic mm of mild steel?
This question is so unspecific. You should state what you want to know about 1 cubic mm of mild steel.
How much does steel weigh per cubic millimeter?
The weight of steel per cubic millimeter can vary depending on the specific type of steel being used. On average, the density of steel is around 7.85 grams per cubic centimeter. To convert this to cubic millimeters, you would need to divide by 1,000, resulting in approximately 0.00785 grams per cubic millimeter for steel.
How much does 1 inch thick 96 x 120 inches steel weigh?
in carbon steel it will weigh 3,267.2 lbs. For weight of we have to know:- 1. volume (in cubic centimeter) 2. density so now 1 inch = 2.54 cm 96 inch = 96*2.54=243.84 120 inch = 120*2.54=304.8 so volume=(2.54*243.84*304.8)=188779 cubic cm density = 7.8g/cm3 (varies based on alloying element from 7.8 to 8.05) now mass= density*volume m= 7.8*176980.29=1472476.022 gram= 1472.5 kg=3246.25 lbs (depends on density)
How much does a 12 inch X 12 inch 1 inch thick piece of steel weigh per foot?
TO answer this question, you need to know the density and the volume of the piece of steel. For example, "mild steel" weighs .284 pounds per cubic inch. The volume of a 12 inch x 12 inch x 1 inch piece of steel is 12 * 12 * 1 = 144 cubic inches. .284 pounds/inch^3 * 144 inch^3 = 40.896 pounds. So each of these steel tiles will weigh about 41 pounds.
What is the Weight of Mild Steel Angles different sections?
what is the weight od 25x25x3 mm mild steel angle per meter
How much does a plate of 12 4x8 sheet of plate steel weigh?
The weight of a plate of steel can vary depending on the thickness of the steel. A rough estimate for mild steel would be around 0.0283 pounds per cubic inch. To calculate the weight of a 4x8 sheet of steel, you would need to know the thickness of the steel in inches. Multiplying the area of the sheet (4x8=32 square feet) by the thickness of the steel will give you the volume of the steel. Multiply the volume by the weight per cubic inch to get the total weight of the sheet.
What is the weight per square meter of 2mm thick HRCA mild steel sheet?
The weight of mild steel can vary slightly depending on the exact composition, but as a general rule of thumb, the weight of a 2mm thick hot rolled commercial quality mild steel sheet is approximately 15.7 kilograms per square meter.
What is the weight of A mild steel rod of 12 m m?
10.66
What is the weight of 50x50x5 mm mild steel angle per meter length?
What is the weight of 50x50x5 mm mild steel angle per metre length? Density mild steel is 7.85 g/cm3 Volume is 2x(4.5x0.5x100)+(0.5x0.5x100)=475 cm3 Weight is 7.85x475=3728.75 g (per metre).
What is the minimum distance allowed between plug welds on aluminum and mild steel?
1 inch
