answersLogoWhite

0


Best Answer

2,700 lbs.

User Avatar

Wiki User

12y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What is the weight of one cubic yard of carbon steel?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Engineering

What is the weight of 1 yard of Cement?

This question has been answered already. The answer given was:Depending on the relative proportions of water, sand, stone, and cement, the weight per cubic yard can vary from less than 2000 lbs to nearly 3500 lbs; I would estimate most commercially (truck) delivered concrete would run close to 3300 lbs per cubic yard - remember there are 27 cubic feet in a cubic yard!


How many pounds in a yard?

A pound (Lb) is a unit of measurement for weight while a yard is a unit of measurement for distance. I think you have your question mixed up! If you need to make any conversions, I suggest the following site http://www.onlineconversion.com/ If you are refering to common measurements used on a construction site, a "yard" is a common abbreviation for a "cubic yard", which is a unit of measurement of volume. (A cubic yard equals 27 cubic feet.) In common usage, you may be asking what does a "cubic yard" of something like dirt or concrete weigh? Since dirt weighs about 110 pounds per cubic feet, a cubic yard of dirt weighs about 2970 Lbs. Since concrete is heavier (150 pcf), a cubic yard of concrete weighs about 4050 Lbs.


How much does reinforced concrete weigh per cubic yard?

Normal weight concrete -- a mixture or sand, cement, and stone gravel -- has an accepted density of 145 pounds per cubic foot. Since there are 27 cubic feet per cubic yard, a cu.yd. weighs 3915 pounds, or almost two tons. Complicating your question is the word "reinforced." Reinforced concrete has steel bars in it, called rebar. Steel has a density of about 490 pounds per cubic foot, which is more than three times the density of concrete, so the generally accepted density of normally reinforced concrete is 150 pounds per cubic foot which results in a cubic yard weighing 4050 pounds, but this depends on the quantity and grade of the rebar used. (Ref. AISC Steel Construction Manual, 13th Ed. Page 17-24. Also older editions have this same information.) There is light weight concrete made with lighter weight substitutes such as vermiculite for the stone and sand. These can have weights from 85 pcf. Also, there are heavy weight concretes made with steel punchings or pieces of lead used to line rooms for x-ray machines or other radioactive sources. There is a Wikipedia article on rebar, if you're interested in looking it up.


What does 1 cubic yard of crushed concrete weigh?

They typical weight of a yard of crushed concrete runs around 3,000lbs or a ton and a half. The weight will vary between company mainly because of the crush size. The smaller the crush size the more weight per yard.


What is the weight of 1 yard of pea gravel?

One yard of PEA Gravel weighs approximately 3,000 pounds Clarification: one CUBIC yard weighs approx 3,000 pounds.

Related questions

What weight is a yard of steel?

I assume you mean a cubic yard of steel. Likely to be between 13,068 and 13,581 pounds.


How much does a cubic yard of steel weigh?

The weight of a cubic yard of steel can vary depending on the type of steel. On average, steel weighs around 490 pounds per cubic foot. Therefore, a cubic yard of steel would weigh around 13,440 pounds.


How much does one cubic yard weight?

1 cubic yard of what?


How much does 1 cubic yard of cement weight?

What is the weight of one cubic yard of cement? If you are asking the weight of 1 cubic yard of CONCRETE it is approximately 2 tons or 4000 pounds per cubic yard when wet.


How much weight 1 cubic yard of ice?

1 cubic yard of ice has a weight of 49421 pound-force.


How many tons in a cubic yard?

The answer depends upon the material to which you are referring too. A cubic yard of compressed cotton is obviously going to weigh less than a cubic yard of steel.


What is the weight of 1 cubic yard of sand?

The weight of 1 cubic yard of sand can vary depending on the type and moisture content of the sand. On average, dry sand weighs about 2,700 pounds per cubic yard.


How much does 1 cubic yard of steel slag weigh?

On average, 1 cubic yard of steel slag weighs around 2,700 to 3,000 pounds, depending on the specific composition and density of the slag.


How many pounds of trash in 1 cubic yard?

The weight of a cubic yard of trash will depend on what the trash is composed of. For example, a cubic yard of paper weighs about 568 pounds, while a cubic yard of aluminum cans weighs about 63 pounds.


What is the weight per cubic yard for gypsum?

The weight per cubic yard for gypsum is approximately 2,300 to 3,000 pounds.


How much weight is 1 cubic yard of CR6?

The weight of 1 cubic yard of CR6 (crusher run) can vary depending on its composition, moisture content, and compaction. On average, CR6 weighs approximately 2,700-3,000 pounds per cubic yard.


Weight of one cubic yard of general trash?

The weight of one cubic yard of general trash can vary depending on the density and composition of the trash. On average, it can weigh between 800 to 2,000 pounds.