0
To allow the feed to be placed at a convenient point
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
Is parasitic elements are used in yagi-uda antenna?
Yes - reflector element and directional elements.
Why negative feed back used in oscillator?
A positive
Why is used the balancing line in boiler feed pump and its direction of flow?
In boiler feed pumps usually the discharge pressure is 20 to 30 times tie suction Pressure so to protect the pump balancing line is given from discharge to suction.
Are Passive reflectors used in both Active and passive Satellite system?
Yes. The most common antenna for satellite systems is the 'Dish'.The dish is a parabolic , passive, reflector.It merely reflects and concentrates the signal to the LNB receiver.Transmission also works this way, bouncing the signal off the dish, to concentrate it in one direction, in a narrow beam.
What is pressure shaft?
Pressure Shaft is enclosed pipe/channel used to deliver/feed water to hydraulic turbines in respect of hydro power plant.
What are the material is used manufacturing Parabolic reflector antenna?
A parabolic reflector antenna is made of fiberglass or metal (usually aluminum).
Is there a difference between a parabolic reflector and a parabolic dish?
A parabolic reflector typically refers to a curved surface that reflects or focuses light, sound, or radio waves to a specific point. A parabolic dish specifically refers to a type of parabolic reflector commonly used to collect or reflect electromagnetic waves, such as in satellite dishes. While they are both parabolic in shape, a parabolic dish is a specialized form of a parabolic reflector designed for a specific purpose.
What type of reflector is a satellite dish?
A satellite uses a Parabolic reflector,What are the mirrors used for? A parabolic reflector (or dish or mirror) is a reflective device used to collect or project energy such as light, sound, or radio waves. Its shape is that of a circular paraboloid, that is, the surface generated by a parabola revolving around its axis. The parabolic reflector transforms an incoming plane wave traveling along the axis into a spherical wave converging toward the focus. Conversely, a spherical wave generated by a point source placed in the focus is transformed into a plane wave propagating as a collimated beam along the axis
What two types antenna used for terrestrial microwave communication?
Virtually all terrestrial microwave communication is point-to-point, using parabolic reflector antennas. A small percentage uses yagi, helical, corner reflector, or flat-plate reflector antennas. Essentially no "omnidirectional" antennas are used in microwave.
Why you are using parabolic shape for radio telescope?
A parabolic shape is used for all reflecting collectors ... visible light telescope, radio telescope, satellite receiver, etc. A parabolic reflector directs all parallel incoming rays toward one point, called the 'focus' of the parabola.
Examine what happens when waves are reflected from a parabolic reflector?
When waves are reflected from a parabolic reflector, they are focused towards a single point called the focal point. This phenomenon is known as "collimation," where the reflected waves become parallel to each other. Parabolic reflectors are commonly used in applications such as satellite dishes and telescopes to collect and concentrate waves at the focal point.
What is a reflector that uses more than one secondary mirror is called?
Reflector telescopes are cheaper to make than refractors of the same size than passing through it, only one side of the reflector telescope's Often a secondary mirror is used to redirect the light into a more convenient viewing spot.
Why the parabola used in satellite dish?
Parallel rays, such as those from a very distance source, are focussed by a parabolic reflector so that they all meet at the focus of the parabola. This results in a stronger signal.
Why a parabolic or concave polished reflector is used in an electric heater?
A parabolic or concave polished reflector is used in an electric heater to focus and direct the infrared radiation produced by the heating element towards a specific area or direction, increasing the efficiency of heat transfer and minimizing heat loss. This design improves the heating performance of the heater by concentrating the heat output in a targeted direction.
Which type antenna used for radar communication?
Radar and communications are two different applications of radio waves. For radar, directional antennas are used, and the normal antenna for a ship installation would be a parabolic reflector with a rectangular aperture about 5 times wider than its height. This gives a narrow beam in the horizontal direction, and pulses are sent out and detected after being reflected by the target.
What are the lenses called in a reflector telescope?
In a reflector telescope, the primary mirror reflects and focuses light to the eyepiece. There are no lenses in the optical path of a reflector telescope.
Reflector disk that collects radio waves?
A parabolic dish or reflector serves to focus and collect radio waves in one specific point or direction. The dish design helps to amplify and enhance the signals received by reflecting them towards a central point, where they can be captured by an antenna or receiver for processing and amplification. This technology is commonly used in satellite dishes, radio telescopes, and communication systems.
