no, if it was it would act like inductance.
An inductor is an electrical component, usually a coil, designed to offer a specific value of inductance (measured in henrys). As the operating current of an inductor affects its inductance its inductance value (inductors are not linear devices, due to their hysteresis characteristics) is normally expressed for a specific range of operating currents.
Inductance is inductance, and is not a function of frequency. Frequency affects reactance, and ultimately impedance, not inductance.
The impedance of a circuit having an inductance and a capacitance in parallel at the frequency at which this impedance has a maximum value. Also known as rejector impedance.
what factors on inductance drepends
no, if it was it would act like inductance.
The voltage across the inductance alone will be(value of the inductance) times (the rate at which the current through it changes)
Inductance is measured in Henrys
"The magnetic field produced by each turn interacts with the field of other turns and multiplies the effect, causing the inductance of a coil of wire to increase by the number of turns (N) squared. Therefore, if you double the number or turns, you quadruple the inductance."
it is used to measure the unknown value of inductance
An inductor is an electrical component, usually a coil, designed to offer a specific value of inductance (measured in henrys). As the operating current of an inductor affects its inductance its inductance value (inductors are not linear devices, due to their hysteresis characteristics) is normally expressed for a specific range of operating currents.
rotor slot more. it is to get a large rotor inductance value of inductance the stator windings
There is a method called dot convention which is used in transformers. the dot shows the direction of current flowing through the coil and whether the value of mutual inductance thus produced will be positive or negative.
Positive
In addition to the number if turns, the inductance also depends on the length and diameter of the winding, the pitch (number of turns per inch), and the material of the core if there is one. Search on line and find an empirical formula for the inductance of a finite coil, and then work to tweak the other parameters to alter the inductance as required.
Inductance is inductance, and is not a function of frequency. Frequency affects reactance, and ultimately impedance, not inductance.
The impedance of a circuit having an inductance and a capacitance in parallel at the frequency at which this impedance has a maximum value. Also known as rejector impedance.