This is not a valid conversion. Cubic units is a measure of volume while square units is a measure of area. Generally, volume is determined by multiplying length x width x depth. Area is normally determined by multiplying length x width.
5000 (square feet) = 464.5152 m2
About 0.3 square miles in 8,000,000 square feet.
For square footage (area) you only have two measurements. So a carpet 4 ft x 4 ft has a square footage of 16 square feet. And a carpet of 4 ft x 8 ft has a square footage of 32 square feet. Three measurements like 4 ft x 4 ft x 8 ft give you cubic footage, or volume. So the volume of a container that size would be 128 cubic feet.
Your square footage is the length and width or 9x9 or 81sq ft. For cubic you need to include another measurement, that would be the depth. For instance if you want the depth to be 9ft also then your cubic measurement would be 9x9x9 or 729 cu ft.
1 cubic yard = 3*3*3 = 27 cubic feet = 27 square feet * 1 ft = 27 sq ft * (3*4 inches) = 27*3 sq ft* 4 in = 81 sq ft at 4 inches thick.
5,000 cubic feet is a measure of volume equal to 3,740.3 gallons.
No.
Your question makes absolutely no sense, because 16 square yards is two-dimensional, and cubic feet are three-dimensional. The two units cannot be converted.
Any dimension that H*W*D =5000 The room could be 1 ft * 1 ft * 5000 ft or 10 ft * 20 ft * 25 ft.
Answer: 5000 m² = 53819.552 ft² OR 53819 ft² and 79.50 in²
To calculate the amount of sand needed, first convert the depth from inches to feet. Since 1 inch is 1/12 of a foot, 1 inch deep over 5000 square feet equals 5000 sq ft × (1/12 ft) = 416.67 cubic feet. To convert cubic feet to cubic yards, divide by 27 (since there are 27 cubic feet in a cubic yard): 416.67 cubic feet ÷ 27 = approximately 15.43 cubic yards. Therefore, you would need about 15.43 yards of sand to cover 5000 square feet to a depth of 1 inch.
Answer: 5000 ft² = 0.114784 acres
Cubic feet is a measure of volume while square feet is a measure of area. They do not directly convert.
Cubic feet is a measure of volume (3 dimensional).Square feet is a measure of area (2 dimensional).The two cannot be converted into each other.It is the same as asking "how many gallons are in an acre?"
60 ft x 10 ft x 6 in is a measure of volume and the appropriate units for measuring volume is cubic yards. Square yards are a measure of area and cannot be converted to cubic yards.
None!!! The answer would be in 'CUBIC Feet'. Square feet is a measure of area. Cubic feet is a measure of volume. However, 10 ft X 10 ft X 8 ft = 800 cu.ft.
624 cubic feet