None, since there can be no conversion. A linear foot is a measure of length in 1-dimensional space while a square foot is a measure of area in 2-dimensional space. The two measure different characteristics and, according to the most basic principles of dimensional analysis, any attempt at comparisons or conversions between the two are fundamentally flawed.
240 square yards = 2,160 square feet.
One square meter equals 10.7639104 square feet. So, 240 square meters equals 2583 square feet.
1 square yard = 9 square feet 240 square yards = 2,160 square feet
A 12x12 inch paver is one square foot. So you would need 240 square feet.
240 square feet. Multiply the length by the width. The result is the area in square feet.
Linear feet measure length, square feet measure area. Comparison is therefore meaningless.
240
240 square meters is 2,583.34 square feet.
240 square yards = 2,160 square feet.
Since there is 9 square feet per square yard, if you have 240 square yards, then you have: 9*240 = 2160 square feet.
240 square feet
To frame a space of 240 square feet, you'll need to calculate the perimeter and the amount of framing required. Assuming standard wall height and no windows or doors, you can estimate that you will need approximately 1 linear foot of 2x4 for every square foot of wall area. This means you would need about 240 linear feet of 2x4. Since a standard 2x4 is 8 feet long, you would require around 30 pieces of 2x4 (240 ÷ 8 = 30).
One square meter equals 10.7639104 square feet. So, 240 square meters equals 2583 square feet.
240 square feet (40 x 6 = 240)
1 square yard = 9 square feet 240 square yards = 2,160 square feet
Answer: 240 ft² = 22.2967 m²
240 square feet.