answersLogoWhite

0

take both index fingers, and slowly glide them into your rectum whilst singing "one more time.. were gona celebrate".

User Avatar

Wiki User

12y ago

What else can I help you with?

Continue Learning about Geometry

Why datum point and baseline are most suitable for sketch?

A datum point and baseline are essential in sketches because they provide a reference framework that ensures accuracy and consistency in measurements and proportions. The datum point serves as a fixed reference, while the baseline establishes a horizontal or vertical guide, allowing for precise alignment of elements in the sketch. Together, they facilitate clear communication of design intent and help in maintaining spatial relationships among various components. This structured approach enhances the overall clarity and effectiveness of the sketch.


Difference between admiralty chart datum and mean sea level?

The chart datum is about 825 mm below the mean sea level. This is usually a showing of the average of the lowest tides.


Why is it important to protect profile and datum point?

Protecting profile and datum points is crucial because they serve as reference standards for measurements and alignments in engineering and manufacturing processes. Maintaining their integrity ensures precision in design and production, reducing the risk of errors that could lead to costly rework or product failures. Additionally, safeguarding these points helps uphold quality control and consistency across projects, ultimately enhancing overall safety and reliability.


Mcdougal littell geometry answers?

go to classzone.com select math select your state then click go


What is work area in foxpro?

A work area is a type of slot in memory for opening tables. These slots are numbered, but once a table is opened, they can also be referred by the name of the table opened (more precisely: by its alias). Here is an example of opening tables: * close all tables first, just in case close database all * open table "client" in work area 1 select 1 use client * open table "invoice" in work area 2 select 2 use invoice * go back to table client, and set an index order select client && "select 1" would also work here set order to ClientId Instead of "select 1" and "select 2", in the above examples, it is preferable to issue "select 0", letting FoxPro automatically select an available work area.

Related Questions

Explain how to select and establish a suitable datum the importance of ensuring that marking out is undertaken from the selected datum and the possible effects of working from a different?

To select a suitable datum, consider a stable reference point on the workpiece or surface. Mark the datum clearly and securely. When marking out, ensure all measurements and reference points are taken from this datum to maintain accuracy and consistency. Working from a different datum can lead to incorrect measurements, misalignments, and errors in the final product. It is crucial to avoid this by consistently using the established datum.


How do you select and establish a suitable datum on metal piece?

To select and establish a suitable datum on a metal piece, first identify the critical features that will serve as reference points for measurement and machining. Choose datums based on factors such as functional requirements, stability, and ease of access. Once identified, use precise measuring tools to define the datum's exact location and orientation, ensuring it is clearly marked and consistent throughout the manufacturing process. This establishes a reliable reference for all subsequent operations, enhancing accuracy and repeatability.


How do you select and establish a suitable datum?

Selecting and establishing a suitable Datum is critical, ensure your datum is at a fixed point. Normally a hole/slot. Holes and slots a normally lasor cut, ensuring they are at an extremely high tolorance already. Then reference the slot or hole to another near by slot or hole. Using these selected points will give you accruate points of measurement/datum.


A primary datum requires how many points of contact?

According to ASME Y14.5, a primary dimensioning datum requires at least 3 points of contact to establish the datum plane. Two points of contact are required for the secondary datum and 1 point of contact is required for the tertiary datum.


When reviewing CMM data how many measurement points are needed to establish the primary datum plane?

To establish the primary datum plane using CMM (Coordinate Measuring Machine) data, a minimum of three measurement points is typically required. These points should be non-collinear and positioned appropriately to define the plane's orientation accurately. By using these points, the CMM can calculate the plane's best-fit surface, ensuring the datum is established correctly for subsequent measurements.


Why do you need to select and use set datum faces and what are the effects of taking readings from different datum?

Selecting and using set datum faces is crucial for ensuring consistent and accurate measurements in manufacturing and engineering processes. Datum faces provide a reference point that establishes a common framework for all measurements, reducing variability and enhancing precision. Taking readings from different datum can lead to discrepancies and inaccuracies, as variations in reference points can distort the intended dimensions and tolerances, ultimately affecting the quality and functionality of the final product.


Is datum the plural of data?

Datum is not the plural of data. Datum is singular, and its plural form is data.


What is assumed ordnance datum?

Assumed ordnance datum is a reference point used in surveying and engineering to establish a consistent vertical level from which elevations are measured. It serves as a baseline for determining heights, depths, and levels of various geographical features or structures. This datum is particularly useful in areas where a formal or established mean sea level is not available, providing a practical standard for construction and mapping projects.


What is hydrography datum?

Correction: What is hydrographic datum? not "hydrography"


What is the definition of 'datum' surfaces?

Datum surfaces are reference surfaces used in engineering and manufacturing to establish a common point for measurements and alignments. They provide a consistent and uniform starting point for design and quality control processes. Examples include planes, lines, and points from which other measurements are made.


Why is it important to establish a job datum?

The height that is used as the base level from which all other levels are established. Used in construction when when setting out a house. Also called a benchmark.


What is datum in design?

datum is the plane in which we can sketch any thing thing