Calculate the cross-sectional area of the barrier in square feet, multiply the area by the density of concrete (150 pounds per cubic foot), and multiply the answer by the length of the barrier in feet.
1 '' gi b class pipe weight of per mtr
Please Calculate the weight per fit of G.I. pipe
You cannot. The mass depends on the material of the shaft and that has not been specified.
The unit weight of a 75x38 mm mild steel rectangular box pipe section can be calculated using the formula: Unit Weight = (Weight of steel per cubic meter) × (Volume of the section). The density of mild steel is approximately 7850 kg/m³. For a 75x38 mm section, you'd first calculate the volume based on the dimensions and wall thickness, then multiply by the density to find the unit weight. For precise calculations, the wall thickness is needed.
To calculate the weight of a 25x3 mm GI (galvanized iron) strip, you first need to determine its volume and then multiply by the density of GI, which is approximately 7.85 g/cm³. The volume can be calculated by multiplying the dimensions (length, width, and thickness). For example, a 1-meter long strip would weigh about 0.59 kg.
To calculate the weight of a precast concrete panel, first determine its volume by multiplying the panel's length, width, and thickness (in feet or meters). Then, multiply the volume by the density of concrete, which typically averages around 150 pounds per cubic foot (2400 kg/m³). The formula is: Weight = Volume × Density. This will give you the total weight of the panel.
Flexicore is a specific type of precast concrete system, primarily used for flooring and roofing. It combines precast concrete slabs with hollow cores to reduce weight while maintaining strength. While all Flexicore products are precast concrete, not all precast concrete products are Flexicore, as precast concrete encompasses a broader range of components and applications.
A standard jersey barrier typically weighs around 4,000 to 6,000 pounds per 10-foot length, which translates to roughly 400 to 600 pounds per foot. The weight can vary slightly depending on the specific dimensions and design of the barrier.
To calculate the weight of an 8-foot long precast concrete culvert pipe with a 36-inch outside diameter and a 4-inch wall thickness, you first determine the pipe's volume. The outside diameter is 36 inches, and the inside diameter is 28 inches (36 - 2 * 4). The volume can be calculated using the formula for the volume of a cylindrical shell. The density of concrete is typically around 150 pounds per cubic foot, so you can multiply the volume by this density to find the weight. The total weight will be approximately 1,200 to 1,300 pounds.
The average weight of an adult Jersey cow is around 900-1200 pounds.
What is the unit weight of aluminium section and how its calculate
The formula to calculate the percentage of weight loss is: (Initial weight - Current weight) / Initial weight x 100.
The best way to accurately calculate your weight would be to weight yourself in the morning. I would also look up calculate myweight.com and put your weight and height they will tell you what you should be.
To calculate the percentage of weight loss, subtract the current weight from the original weight, then divide that number by the original weight and multiply by 100. This will give you the percentage of weight lost.
To calculate weight loss percentage, subtract the current weight from the initial weight, divide the result by the initial weight, and then multiply by 100. This will give you the weight loss percentage.
To calculate the percentage of weight loss, you subtract the current weight from the original weight, divide that number by the original weight, and then multiply by 100. This will give you the percentage of weight lost.
To calculate percentage weight loss, you subtract the final weight from the initial weight, divide that number by the initial weight, and then multiply by 100. This gives you the percentage of weight lost.