use a known volume container to measure a quantity = 200 x (the depth you want the sand).
4 per foot = 48 sq feet. 192 pavers will cover a 6ft x 8ft area
9.26 cubic yards for every inch of depth.
10 sqare feet is an area so it covers 10 square feet.
It would depend on how thick you want to spread it.
1 371.42857 US gallons or 5.19142188 cubic meters
sfdl;kl;jksdl;jkdsfjksdfasdjka
How much cement is needed to cover 192 square feet of area
The answer will depend on the depth to which the area is covered.
The obvious answer is to figure out the total area of the room and then buy an area of carpet equal to this amount. Since rooms often do not match up with standard carpet widths, this can lead to a patchwork of small bits cobbled together to cover the last areas of the room. Choose an area of the room that can be covered with one piece of the carpet. This is carpet area #1. Then determine the fewest large pieces of carpet needed to cover the rest -- even if there is some waste involved. This is carpet area #2. Total carpet purchase is area 1+2.
You will need 1500 cubic feet.
-A way to determine how much of an impact you have is to determine your ecological footprint. Ecological footprint is a calculation of the total area of land and water needed to supply all of the materials produce
First you find out what it is needed for... then u ask this question
they covered area
if only surface of bulletin board is required then we can use the formula-length x breadth.
it covers about 193
50 m2 x 15 cm = 7.5 m3
2.37 cubic yards of stone for every 3 inches deep it needs to be