Here is a good site to figure it out 80 acres is 3,484,800 square feet 43560.4 sq ft = 1 Acre
You can't. Feet are measure of length and an Acre is a measure of area - thus the two can not be equated. You need to know how many Square feet are in an Acre - because square feet are a measure of area too. 1 acre = 43560 square feet. See the conversion utility in the links I will place below.
Can,t convert acres to linear feet. Acres is a measurement of Area, where liner feet is just that: liner. You could ask what is the perimeter of an acre- then you could figure what the linear feet around that acre would be.
point 9 of an acre or 1 acre split into 10 or having nine pieces.9/10 of an acre.
Yes, it is 47% of an acre (about 1/2).
There are 43,560 square feet in one acre.
How do you figure a Consent to Surety Partial? The per centage if the retainage is 5%
Each acre-foot equates to 325,851 US gallons of water so multiply acre-feet by 325,851 to determine fluid gallons.
figure it out
(60,000 sq ft) / (43,560 sq ft / acre) = 1.3774 acre (rounded)
Here is a good site to figure it out 80 acres is 3,484,800 square feet 43560.4 sq ft = 1 Acre
An acre is 66 x 660 feet. Or any other rectangle (or other figure) with the same number of square feet, since it is a unit of area.An acre is 66 x 660 feet. Or any other rectangle (or other figure) with the same number of square feet, since it is a unit of area.An acre is 66 x 660 feet. Or any other rectangle (or other figure) with the same number of square feet, since it is a unit of area.An acre is 66 x 660 feet. Or any other rectangle (or other figure) with the same number of square feet, since it is a unit of area.
You don't have to figger: a square acre has a perimeter of 208.7 fett on all four sides. But you can find the square root of the 43560 square feet inside an acre to get the perimeter measuremnets.
An acre is a two dimensional measure of area. You cannot have square acres since that would represent a measure of "area" in a hyperspace of 4 dimensions. And a square acre foot would be in 5 dimensional [linear] hyperspace!
You can't. Feet are measure of length and an Acre is a measure of area - thus the two can not be equated. You need to know how many Square feet are in an Acre - because square feet are a measure of area too. 1 acre = 43560 square feet. See the conversion utility in the links I will place below.
This figure will vary from year to year, of course, but in 2011, the average price was $8.10 per hundredweight (cwt) on average yield of 404 cwt per acre, bringing about $3,270 dollars per acre before expenses to the farmer.
The acre is a measurement used to quantify large areas such as tracts of land. If you haveÊa triangular lot, you need to know the base and height dimensions of the lot to figure its acreage.