0
50
What else can I help you with?
How many square feet is a 12x12 deck?
144
How many square meters is a deck 4M x 3M?
Multiply the two dimensions to get the area. The calculation will give you 12 square meters.
How many square feet in piece of metal deck measuring 3' x 24'?
3' means 3 feet and 24' means 24 feet. So the square footage is 3ft x 24 ft = 72 sq.ft.,
If the perimeter of the deck is 30 feet and the length of the deck is 10 feet what is the width of the deck?
It is 5 feet because 2*(10+5) = 30 feet which is the perimeter
What is a flat surface shaped like a polygon?
my deck
How many 1x4x10 boards to cover a 10x10 deck?
To cover a 10x10 deck with 1x4x10 boards, you'll first calculate the area of the deck, which is 100 square feet. Each 1x4 board (which measures 3.5 inches wide and 10 feet long) covers approximately 2.92 square feet. Therefore, you'll need about 34 boards (100 ÷ 2.92 ≈ 34.25) to cover the entire deck, rounding up to account for cuts and waste.
How many 1X6x12' deck boards to cover 800 sq ft?
How many 1x6x12 deck boards to cover 800 sq.ft
If you are building a 28x16 deck how many 5-4x6x8 deck boards do you need?
Oh, dude, math time! So, to cover a 28x16 deck, you'd need 448 square feet of decking. Each 5/4x6x8 board covers about 2.22 square feet, so you'd need roughly 202 deck boards. But hey, maybe grab a few extra in case you miscount or your neighbor's dog decides to snack on one!
How many deck board 1x6x16 would cover 350 sf?
Roughly 43-44 boards for the ideal deck. However, it will depend on the shape of the deck, and spaces between supports.
What is the total cost of purchasing 5/4 x 6 deck boards for a 10 ft x 12 ft deck?
To find the total cost of purchasing 5/4 x 6 deck boards for a 10 ft x 12 ft deck, you would first calculate the total square footage of the deck (120 sq ft). Then, you would determine how many deck boards are needed based on the size of the boards and the deck area. Finally, you would multiply the number of boards needed by the cost per board to find the total cost.
How many deck bd 1x6x16 to cover 740 sq ft?
To determine how many 1x6x16 boards you need to cover 740 square feet, first calculate the coverage of one board. A 1x6 board is 6 inches wide, which is 0.5 feet, and 16 feet long. The area of one board is 0.5 feet x 16 feet = 8 square feet. Therefore, to cover 740 square feet, you would need 740 ÷ 8 = 92.5 boards. Since you can't purchase half a board, you would need to round up to 93 boards.
How many gallons does it take to cover a deck with an area of 1960 square feet?
The answer depends on the depth to which the deck is covered.
When building a 12x30 deck how many 2x6x12s will be needed?
To build a 12x30 deck using 2x6 boards, you need to determine the total area of the deck and the coverage of each board. The deck area is 360 square feet (12 feet x 30 feet). A 2x6 board typically covers about 5.5 inches in width (actual size), so you can fit approximately 5.5 boards across the width of the deck (12 feet = 144 inches). With 30 feet length, you would need around 33 boards (30 feet / 1 foot per board) to cover the length, resulting in approximately 165 boards total (33 boards x 5). Therefore, you would need around 165 2x6x12 boards, but it's always wise to account for waste and cuts, so purchasing a few extra is recommended.
How can I fix uneven deck boards?
To fix uneven deck boards, you can use a power sander to level them out or replace the boards that are significantly uneven. Additionally, you can adjust the joists underneath the deck to ensure they are level and provide proper support for the boards.
How to Fix Bowed Deck Boards?
Even if you use a good supplier for your lumber, you might find that many of your deck boards are bowed. This can create gaps and sloppy look for your deck. To straighten out bowed deck boards, simply place the deck board against the others with the bowed side in and nail along the length until it is even with the other boards.
Ive got a 7800X3200 deck how many lineal meters of decking will you require?
Lineal metres = Square metres/Width of the boards.
How can I remove deck boards that are screwed in?
To remove deck boards that are screwed in, you will need a power drill with a screwdriver bit to unscrew the screws holding the boards in place. Start by locating the screws along the board and then carefully unscrew them one by one. Once all the screws are removed, you can then lift and remove the deck boards from the deck frame.
