0
What else can I help you with?
What is a lineal meter?
The term lineal meter is used to describe the nominal length of an item. For example carpet maybe produced on a loom perhaps 4m wide. A lineal meter of carpet would be 1m long x 4m wide. Thus 4 lineal meters of this particular carpet would cover 16 square meters. In a similar fashion timber is often sold by the lineal meter which describes the cost per meter of length of the board. The board would have a width and if you were to the purchase timber to build a deck you would need to calculate the number of lengths of boards to cover the area of deck having taken into account the width of the board. When ordering you would ask for X lineal meters of the particular board. Obviously its important to know the particular specifications of the material you intend to use. For example not all carpet is produced on a 4m loom and so it is important to understand the effect of substituting different materials so that a material shortage or wastage does not occur.
What are the odds of selecting a 3 from a deck of cards?
Well there are 52 cards in a full deck. There are four 3's in a full deck, so the probilitiy of selecting of 3 out of a deck would be 4/52.. so the odds are 1 out of 13 OR 7.69%
What unit would you use to measure your teachers deck?
cm
I have an above ground pool with a deck attached on one side and aluminum decking all around.The pool size alone is 15x24 oval. What size pool cover should I buy to cover all decking?
Add the height of the pool to the 15' width of the pool. Then add the width of the deck to the 24' length of the pool to obtain the right measurement.
How can you make a better Yugioh deck with the 3 Egyptian gods and the 3 wicked cards and dragons?
That would make a bad deck, considering all that would require too many Tributes
What deck is better an Infernity deck or a Exodia deck?
It would be a Destiny board deck or final countdown deck.
What is the total number of deck boards needed for a deck that is 5 feet wide and 4 feet long, if each deck board is 4 feet long?
To calculate the total number of deck boards needed for a deck that is 5 feet wide and 4 feet long, you would first find the perimeter of the deck, which is 18 feet. Since each deck board is 4 feet long, you would divide the perimeter by the length of each board to get the total number of boards needed, which is 4.5 boards. Since you can't buy half a board, you would need to round up to 5 boards.
Would original skateboards trucks fit on a sector 9 deck?
It depends on the size of original trucks and the board clearance of the deck you have.
What is a piece of thin wood used to cover a roof?
The thin piece of wood used to cover a roof is called ply board or deck board. Plyboard is a sheet material manufactured from thin layers or plies of wood veneer that are glued together.
What is the purpose of a ledger board flashing in deck construction?
The purpose of a ledger board flashing in deck construction is to prevent water from seeping behind the ledger board and causing damage to the structure of the deck.
What is the purpose of a deck ledger board and how is it used in the construction of a deck?
The purpose of a deck ledger board is to securely attach the deck to the house. It is typically attached to the house's exterior wall and provides support for the deck joists. This helps ensure the stability and structural integrity of the deck.
What is the standard size of a deck ledger board?
The standard size of a deck ledger board is typically 2 inches by 10 inches.
What skate deck is better baker or real?
I would say baker, but it all depends on your needs for a board.
What is the purpose of a ledger board in deck construction?
The purpose of a ledger board in deck construction is to provide structural support and attachment for the deck to the house or building. It helps to distribute the weight of the deck evenly and securely to the building's structure.
What are the dimensions of a 5/4 deck board?
A 5/4 deck board typically has a thickness of 1 inch and a width of 4 inches.
What is the purpose of a ledger board in the construction of a deck?
A ledger board is used in deck construction to provide structural support and attachment for the deck to the house. It helps distribute the weight of the deck evenly and securely to the house, ensuring stability and safety.
How many 1X6x12' deck boards to cover 800 sq ft?
How many 1x6x12 deck boards to cover 800 sq.ft
