0
How many 4inches by 8inch bricks are needed to build a walk 6ftwide and 24ftlong?
Wiki User
∙ 15y ago
648 Because: There are 12 inches in 1 foot. So 1ft wide is 3 bricks (12/4=3) and 1 ft long is 1.5 bricks (12/8 = 1.5). So 6ft x 3 = 18 bricks, 24ft x 1.5 = 36 bricks. To get the area: 36 bricks x 18 bricks = 648 Bricks.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
How many bricks do you need to cover a 12' X 12' room?
Assuming a brick is 4" x 8", if you lay out your bricks, 3 wide and 3 long, you'll get an area 12 inches x 24 inches. So every 9 brick, you'll cover 2 square feet. This gives the basic calculation of 4.5 bricks per square foot. A 12' x 12' room is 144 square feet. 144 x 4.5 = 648 bricks needed
How many one foot wide bricks are needed for a circumference that has a diameter of ten and a half feet?
The circumference of a circle is pi x diameter, where pi equals approximately 3.14. Therefore, the inner circumference of a brick circle with an inside diameter of 10.5 feet is 32.99 feet. As a result, 33 one foot bricks would create a circle with a diameter slightly larger than 10.5 feet, without any gaps between the bricks.
How many bricks are needed to enclose a triangular flower garden that has sides measuring 3 feet 4 feet and 5 feet if each brick is 8 inches long?
all you do is take the size 3 ft 4 ft 5 ft and add them together =12 and then you times that by 12 because there are 12 inches in a foot = 144 inches and now you divide that by 8 inches and that will give you a real close est of bricks =18 bricks
How many straws are needed make a pentagonal prism?
15 straws are needed
How many tiles needed to cover the floor?
The amount of tiles needed to cover a floor will depend on the size of the floor.
How many 4inches by 8inch bricks are needed to build a wall 6ft wide and 24feet long?
648
How many bricks needed for 1010 feet?
depends on how big the bricks are
How many bricks would you need if the area of a patio is 396 square feet and the bricks are 9 x 8?
If the bricks are in feet then 51/2 bricks would be needed.
How many bricks needed to pave a path?
It depends what the dimensions of the path are
How much lime sand is needed for 720 bricks?
1000 km
How many bricks needed for 27 square feet area?
216
How many bricks fit into 1 square meter?
In general: For an area of 1 sq. m, the bricks needed are 60 and 0.02 cubic meters of mortar. If the area is 2 sq. meters, the needed quantity is 120 bricks and the mortar required is 0.05 cubic meters. Note: It does depend on what country the bricks are from, as every country will likely have different sized bricks -- for example, in the USA bricks are usually 8 × 4 × 2.25 inches (203 × 102 × 57 mm).
How many bricks are in a standard lot?
There are roughly five hundred bricks in a standard lot. The amount needed for any given project depends upon the size of the bricks, size of the project, and pattern going in.
How many 4-inch by 8-inch bricks are needed to build a 6feet wide and 24 feet long?
648 bricks to build the walk
How many 4-inch bricks by 8 inch bricks are needed to build a walk 6 feet wide and 24 feet long?
648
How many 4 inch bricks by 8 inch bricks are needed to build a walk 6 ft wide and 24 ft long?
648
How many decorative bricks 10 inches long would be needed to go around a circular garden that is 8 feet in diameter?
You will require 61 bricks.
