A 12x12 inch paver is one square foot. So you would need 240 square feet.
It depends on the units used to measure the pavers: inches, centimetres, cubits, etc. It is not possible to answer the question without that information.
In theory the answer is 240 tiles but this assumes that the area is "well behaved" and, if not, that you are prepared to use all the offcuts to fill bits in mosaic-style. A shape which in 17 inches wide, for example, will require a lot more pavers.
6 If we assume that the pavers are 6 inches by 9 inches, then its area is 6*9 = 54 square inches. 54 sq.in. = 54/144 = 0.375 square feet each. 36 sq.ft / 0.375 sq.ft. = 96 pavers (nett). In practice you may need a few extra to allow for breakages, out-of- squareness, etc.
How many square feet will a ton of salt cover?
You would need 320 pavers to cover 160 square feet with 6x9 pavers, assuming each paver covers 0.5 square feet.
4.5 pavers will cover 1 sq foot. So 4.5 x 360 =1620 pavers
If each paver is 6 x 3 then it has an area of 18 square feet. You will need exactly 25 of these to cover an area of 450 square feet.
It will take four pavers to cover one square foot. You will need 720 pavers.
You would need approximately 104 pavers to cover 250 square feet with 16 x 16 pavers, assuming no cuts or wastage. This calculation accounts for the fact that each paver covers 1.78 square feet (16 x 16 = 256 square inches, which is equivalent to 1.78 square feet).
30x20=600
1 square foot = 144 square inches100 square feet = 14,400 square inches8-in x 4-in = 32 square inches14,400/32 = 450 pavers
A 12x12 inch paver is one square foot. So you would need 240 square feet.
you would need 10 pavers to cover this area if the pavers are 1x1 ..most pavers are not this large they are usually 2x4. I would recommend buying a couple of extra pavers so that you can have cuts instead of all the pavers being the same size.
128; each paver is half a square foot.
18" is 1.5', so we can discover the number of square feet in one paver by multiplying 1.5 x 1.5 = 2.25 square feet. To fill an area of 14' x 14', or 196 square feet, you would need 196 / 2.25 = 87 pavers, with room for .11 pavers left over. So to cover it completely, 88 pavers would do the trick.
200(square feet)x12(inches in a foot)=2400(inches)8(inches)x8(inches)=64(inches)2400(inches)÷64(inches)=37.5(pavers)37.5 pavers (if you need whole pavers, 37)