bus topology and man
A topology is the physical configuration of a network. Each network has their own particular type of topology, with the most common being LAN or WAN. Irregular topology is a common topology of LAN, where the information is sent through random connections between computers.
Mesh Topology
-it is relatively easy to troubleshoot problems on this topology -the network services require no reconfiguration if the network structure changes -there are no device installation difficulties
[object Object]
Bus topology is not a broadcast type
Vampire Tap Big collision and broadcast domains, bandwidth problems.
Zero. No collisions can occur within a full-duplex environment, as transmit and receive operations are performed on another set of wires. Thus, no collision domains would exist. Carrier Sense Multiple Access with Collision Detection (CSMA/DC) is not part of a full-duplex network for this reason.
One of ways to do that is to use VLAN, but you need switch or router supporting. Also just single router without VLAN can separate networks isolating broadcast and collision domains. Some switches can limit broadcast domains too but they are rather expensive.
network this is cisco ccna online test. the answer should be option #3
VLAN
Switches increase the number of collision domains in the network.
Jam signal
ROUTER!
When you want to create additional networks and /or broadcast domains.
When you want to create additional networks and /or broadcast domains.
100000