0
To get the area you multiply the length and the width. Doing the math gives an answer of 150 square feet.
Wiki User
∙ 9y ago
Add your answer:
Earn +20 pts
How much fencing is needed for a 4791 square feet backyard?
The distance around 4,791 square feet depends on whether it is a square, a rectangle, or a really long, narrow rectangle.
How much greater is the area of a square that has one side equal to 4 feet than a rectangle that measures 3 feet long and 2 feet wide?
Area of square = 4 x 4 = 16 sq ft; area of rectangle = 3 x 2 = 6 sq ft. Area of the square is two-and-two-thirds that of the rectangle.
How much ground is covered in 120 square feet?
It could be many different sizes. An example would be a rectangle, 30 feet by 40 feet.
23 feet long by 12 feet wide how much is the sq. feet?
In a rectangle multiply the two dimensions and get the area. 23 times 12 equals 276 square feet.
How much maximum area can 100 ft of fence hold in a rectangle?
The maximum area possible using 100 feet of fencing is that inside a circular fence. But, since you asked about a rectangular fence: a 25x25 fence would hold 625 square feet. a 10x40 fence would hold 400 square feet. a 5x45 fence would hold 225 square feet. As you can see, the square is the rectangle that encompasses the largest area, as it is closest to a circle.
How to compute the area to know how much tons of refrigeration is needed?
I assume your formula is based on interior square feet of building area. If the building is a rectangle or square, then the length in feet, multiplied by the width, in feet, gives you the total area, in square feet. If the building is square, the length and width are both the same length. Measure the lengths and widths in feet and tenths of feet, or if allowed, round off to the nearest foot. If you use inches, convert them to feet and tenths of feet, or if allowed, round off the tenths of feet to the nearest foot. If the building has more than four sides, draw lines inside the building, to divide the interior building shape into two or more rectangles. Calculate the area for each rectangle and add up the areas from each rectangle, to get the total square feet or total area of the building.
How much is 10.5 ft by 16 ft?
If that's supposed to be a rectangle, then multiply length x width. That will give you the area, in this case in square feet.
How much is 200x200 square feet?
It is 40,000 square feet.
How much is 14X20 in square feet?
280 square feet.
How much square feet is 11x20?
220 square feet
How much is 112 square meters in square feet?
1,205.56 square feet.
How much is 1000 square meters in square feet?
10,763.9 square feet.
