for residential building 1 sqm steel required =8kgs
836.12736 square meters.
The amount of steel required for a lintel typically depends on its design, load-bearing requirements, and local building codes. Generally, for a standard lintel, you might use around 0.1 to 0.15 kg of steel per square foot. Therefore, for a 100 square foot lintel, you would need approximately 10 to 15 kg of steel. It's important to consult with a structural engineer for precise calculations based on specific conditions.
14000
150 square meters is 1,614.59 square feet.
For a raft foundation, the amount of steel required is in RCC per square meter. This can be calculated using the value of 18 kilograms steel per square meter.
for residential building 1 sqm steel required =8kgs
1000 kg
13%
sdjahsagdsyadf
ju
Square metres are an area, a ton is a mass the units are incompatible.
You cannot weigh an area, but you can weigh a volume... so, one cubic meter of stainless steel weighs 7480 - 8000 kg. See related link for the source.
One square meter = ~1.2 square yards.
1 (square meter) = 10.7639104 square feet.
One square meter of area.
One square meter = about 10.764 square feet.